Faculty Bibliography

OBJECTIVES/HYPOTHESIS/OBJECTIVE:Fibula flaps are routinely used for osseous reconstruction of head and neck defects. However, single-barrel fibula flaps may result in a height discrepancy between native mandible and grafted bone, limiting outcomes from both an aesthetic and dental standpoint. The double-barrel fibula flap aims to resolve this. We present our institution's outcomes comparing both flap designs. STUDY DESIGN/METHODS:Retrospective cohort study. METHODS:We conducted a retrospective review of all patients undergoing free fibula flap mandibular reconstruction at our institution between October 2008 and October 2020. Patients were grouped based on whether they underwent single-barrel or double-barrel reconstruction. Postoperative outcomes data were collected and compared between groups. Differences in categorical and continuous variables were assessed using a Chi-square test or Student's t-test, respectively. RESULTS:Out of 168 patients, 126 underwent single-barrel and 42 underwent double-barrel reconstruction. There was no significant difference in postoperative morbidity between approaches, including total complications (P = .37), flap-related complications (P = .62), takeback to the operating room (P = .75), flap salvage (P = .66), flap failure (P = .45), and mortality (P = .19). In addition, there was no significant difference in operative time (P = .86) or duration of hospital stay (P = .17). After adjusting for confounders, primary dental implantation was significantly higher in the double-barrel group (odds ratio, 3.02; 95% confidence interval, 1.2-7.6; P = .019). CONCLUSION/CONCLUSIONS:Double-barrel fibula flap mandibular reconstruction can be performed safely without increased postoperative morbidity or duration of hospital stay relative to single-barrel reconstruction. Moreover, the double-barrel approach is associated with higher odds of primary dental implantation and may warrant further consideration as part of an expanded toolkit for achieving early dental rehabilitation. LEVEL OF EVIDENCE/METHODS:III Laryngoscope, 2021.

BACKGROUND:Virtual surgical planning has contributed to technical advancements in free fibula flap mandible reconstruction. The authors present the largest comparative study on the latest modification of this technology: the use of patient-specific, preoperatively customized reconstruction plates for fixation. METHODS:A retrospective chart review was performed on all patients undergoing mandibular reconstruction with virtually planned free fibula flaps at a single institution between 2008 and 2018. Patient demographics, perioperative characteristics, and postoperative outcomes were reviewed. Reconstructions using traditional fixation methods were compared to those using prefabricated, patient-specific reconstruction plates. RESULTS:A total of 126 patients (mean age, 48.5 ± 20.3 years; 61.1 percent male) underwent mandibular reconstruction with a free fibula flap. Mean follow-up time was 23.5 months. A customized plate was used in 43.7 percent of cases. Reconstructions with patient-specific plates had significantly shorter total operative times compared with noncustomized fixation methods (643.0 minutes versus 741.7 minutes; p = 0.001). Hardware complications occurred in 11.1 percent of patients, with a trend toward a lower rate in the customized plate group (5.5 percent versus 15.5 percent; p = 0.091). Multivariate regression showed that the use of customized plates was a significant independent predictor of fewer overall complications (p = 0.03), shorter operative time (p = 0.014), and shorter length of stay (p = 0.001). CONCLUSIONS:Compared to traditional fixation methods, patient-specific plates are associated with fewer complications, shorter operative times, and reduced length of stay. The use of customized reconstruction plates increases efficiency and represents the latest technological innovation in mandibular reconstruction. CLINICAL QUESTION/LEVEL OF EVIDENCE:Therapeutic, III.

PURPOSE/OBJECTIVE:Mandibular defects involving the condyle represent a complex reconstructive challenge for restoring proper function of the temporomandibular joint (TMJ) because it requires precise bone graft alignment for full restoration of joint function. The use of computer-aided design and manufacturing (CAD/CAM) technology can aid in accurate reconstruction of mandibular condyle defects with a vascularized free fibula flap without the need for additional adjuncts. The purpose of this study was to analyze clinical and functional outcomes after reconstruction of mandibular condyle defects using only a free fibula graft with the help of virtual surgery techniques. MATERIALS AND METHODS/METHODS:A retrospective review was performed to identify all patients who underwent mandibular reconstruction with only a free fibula flap without any TMJ adjuncts after a total condylectomy. Three-dimensional modeling software was used to plan and execute reconstruction for all patients. RESULTS/RESULTS:From 2009 through 2014, 14 patients underwent reconstruction of mandibular defects involving the condyle with the aid of virtual surgery technology. The average age was 38.7 years (range, 11 to 77 yr). The average follow-up period was 2.6 years (range, 0.8 to 4.2 yr). Flap survival was 100% (N = 14). All patients reported improved facial symmetry, adequate jaw opening, and normal dental occlusion. In addition, they achieved good functional outcomes, including normal intelligible speech and the tolerance of a regular diet with solid foods. Maximal interincisal opening range for all patients was 25 to 38 mm with no lateral deviation or subjective joint pain. No patient had progressive joint hypomobility or condylar migration. One patient had ankylosis, which required release. CONCLUSION/CONCLUSIONS:TMJ reconstruction poses considerable challenges in bone graft alignment for full restoration of joint function. The use of CAD/CAM technology can aid in accurate reconstruction of mandibular condyle defects with a vascularized free fibula flap through precise planning and intraoperative manipulation with optimal functional outcomes.

BACKGROUND: The microvascular free fibula flap has become the gold standard for reconstruction of complex mandibular defects since its description by Hidalgo in 1989. Prior studies have demonstrated its safety and efficacy in the pediatric population. However, this reconstructive method is often used only as a last resort for correction of congenital mandibular hypoplasia, after failure of bone grafting and distraction osteogenesis. The authors describe our experience using this technique, facilitated by virtual planning and prefabricated cutting jigs, for children with severe congenital mandibular hypoplasia. METHODS: All patients with mandibular reconstruction with a fibula flap in children with congenital mandibular hypoplasia between 2009 and 2014 by the senior authors were identified. Each patient underwent preoperative computed tomography scanning and virtual surgical planning to create custom cutting jigs for creation of the mandibular defect and fibular osteotomies. Preoperative, intraoperative, and postoperative medical records were examined in detail. RESULTS: Five patients age 10 to 18 with congenital mandibular hypoplasia and Pruzansky Grade III mandibles underwent microvascular free fibula flap for mandibular reconstruction during this period. Flap success rate was 100%. All patients underwent subsequent revision procedures to improve symmetry or for hardware removal. The 4 patients in our series who required dental implants were able to have them placed into their mandibular reconstruction. CONCLUSIONS: Preoperative virtual planning and prefabricated cutting jigs allow for precise complex fibula reconstruction of the mandible in the pediatric population. Additionally, virtual planning facilitates concomitant orthognathic procedures in patients with hemifacial microsomia. Our early success in this patient population leads us to suggest that while the free fibula can be safely and successfully used after multiple prior surgical interventions in the same anatomic region, it can also be a powerful tool for primary correction of congenital mandibular hypoplasia.

In select patients with advanced disease resulting in large composite tissue defects, consideration is often given to multiple flap reconstruction. The authors propose an alternative option. Using virtual surgical planning the authors demonstrate how modest sacrifice in projection translates into a substantial decrease in the volume and surface area of soft tissue needed, in turn maximizing soft tissue coverage with a single fibula free flap. The authors used 3-dimensional virtual surgery to simulate angle-to-angle reconstructions using free fibula flaps. The reference 3-segment reconstruction was done using symphyseal projection to the plane perpendicular to the anterior nasal spine, a customary landmark. Additional simulations were then performed using recessed projections 0.5 mm, 1 cm, 1.5 cm, and 2 cm posterior to anterior nasal spine plane. Program analytics were used to calculate the surface area and volume of the floor of mouth. With projection recessed by 1 cm, surface area decreased 22% to 14 cm. With projection recessed by 2 cm, surface area decreased 44% to 10 cm. With a 3-segment construct converted to a 2-segment construct, surface area decreased 22% to 14 cm. This demonstrates for the first time an official analysis of an intraoperative modification that sacrifices little and gains a lot. Ultimately, 1 compound flap can be used in extensive reconstructions with increased confidence that it will not be overly stressed.

Increased upper airway resistance from postoperative changes after major head and neck surgery may cause elevated transtracheal pressures and result in tracheostomy speaking valve intolerance. This may be particularly true among patients with baseline pulmonary disease. We describe a patient recovering from oral cancer resection and flap reconstruction who demonstrated prolonged ventilator dependence and tracheostomy speaking valve intolerance with abnormal tracheal manometry. We attempted to improve speaking valve tolerance through the adaptation of a valve modification intended to reduce transtracheal pressures. Drilling holes into the 1-way speaking valve allowed for excess air egress and resulted in normalization of transtracheal pressures with improved speaking valve tolerance. This 1-way speaking valve modification may serve as a simple method to allow for earlier restoration of voicing and potentially reduce the number of ventilator- dependent days in this patient population.

BACKGROUND: Reconstruction of maxillary defects following tumor extirpation is challenging because of combined aesthetic and functional roles of the maxilla. One-stage reconstruction combining osseous free flaps with immediate osseointegrated implants are becoming the standard for mandibular defects, and have similar potential for maxillary reconstruction. METHODS: A woman with maxillary Ewing sarcoma successfully treated at age 9 with neoadjuvant chemotherapy, right hemimaxillectomy, and obturator prosthetic reconstruction presented for definitive reconstruction, complaining of poor obturator fit, and hypernasality. Her reconstruction was computer-simulated by a multidisciplinary team, consisting of left hemi-Lefort I advancement and right maxillary reconstruction with a free fibula flap with immediate osseointegrated implants and dental prosthesis. RESULTS: Full dental restoration, midface projection, and oral fistula corrections were achieved in 1 operative stage using this approach. CONCLUSIONS: This patient demonstrates a successful approach for maxillary reconstruction using computer-planned orthognathic surgery with free fibula reconstruction and immediate osseointegrated implants with dental prosthesis.

BACKGROUND: Virtual surgical planning (VSP) has contributed to a number of technical innovations in mandible reconstruction. We report on these innovations and the overall evolution of mandible reconstruction using free fibula flaps at our institution. METHODS: We performed a retrospective chart review of all patients who underwent virtually planned free fibula flap reconstruction of the mandible. Comparisons were made between cohorts based on distinct eras related to the virtual planning approach. RESULTS: Seventy-six patients underwent a total of 78 VSP-assisted mandible reconstructions with free fibula flaps. Significant differences were noted among the groups with regard to mean number of segments, percentage of flaps that had at least 3 segments, percentage of flaps that had double-barrel components, and innovations per flap. CONCLUSION: VSP-assisted mandible reconstruction has contributed to more complex surgeries at our institution. The technology ensures functional restoration, permitting an optimized aesthetic reconstruction that has not increased operative times or complications. (c) 2016 Wiley Periodicals, Inc. Head Neck, 2016.

With the advent of the microvascular fibula free flap (MVFFF), maxillofacial reconstruction following ablative surgery has been a viable solution for patients with large maxillary or mandibular defects. Furthermore, total maxillofacial reconstruction in a two-stage process, where the fibula is harvested and dental implants placed (Stage I) followed by ablative surgery, inset and immediate loading with a dental prosthesis (Stage 2) has been well documented.1 This procedure, however, requires two separate surgical procedures and a delay of at least 10 weeks between each stage where the patient is often left partially or completely edentulous. The incorporation of computer-aided surgical simulation (CASS) and computer-aided design/computer-aided manufacturing (CAD/CAM) has made it possible to not only complete total maxillofacial reconstruction from tumor ablationto immediate insertion of an implant-retained dental prosthesis in a single OR procedure, butithas also increased the predictability and accuracy of maxillofacial reconstruction and decreased intraoperative time.2 Patients requiring more complex maxillofacial reconstruction heavily benefit from increased precision of the final surgical outcome as the accuracy of each osteotomy influences subsequent steps. The aim of our study is to assess the predictability and accuracy of virtually planned, single-stage total maxillofacial reconstruction, also known as 'Jaw in a Day'.³ We conducted a retrospective chart review of all patients who underwent maxillofacial tumor ablation, MVFFF reconstruction, implant placement and immediate implant loading with a dental prosthesis in a single OR procedure. These procedures were completed at Bellevue Hospital Center and NYU Langone Medical Center from January 2011 to January 2015. All cases were virtually planned with Medical Modeling (Golden, CO), and stereolithographic models, osteotomy guides, implant guides, and dental prosthesis were fabricated via CAD/CAM technology. To determine the precision and accuracy of the post-surgical outcomes, we compared the final positions of the implants and fibula on postoperative CT imaging with the planned positions of the implants and fibula based on preoperative virtual planning with Medical Modeling. A total of 8 patients underwent tumor ablation, MVFFF reconstruction, implant placement and immediateimplant loading with a dental prosthesis in a single OR procedure. All patients were diagnosed with benign mandibular (7) and maxillary (1) tumors, including ameloblastoma (6), odontogenic myxoma (1), and AVmalformation (1).Atotal of 35implants were placed with satisfactory primary stability at the time of surgery. On average, the final positions of the implants placed were within 2mm of the virtually treatment planned positions within the fibula. To date, there have been no flap failures and only one implant has failed osseointegration into the MVFFF. Total maxillofacial reconstruction via CASS and CAD/CAM technology has made it possible for surgeons to complete these procedures with high precision and accuracy while minimizing intraoperative time. Additionally, immediate dental rehabilitation is possible at the time of ablation, eliminating the period of edentulism for these patients. Given the highly predictable and accurate postoperative outcomes and low complications rates of virtually planned total maxillofacial reconstruction with a MVFFF and immediate dental rehabilitation, this technique is quickly becoming the standard of care for patients requiring complex maxillofacial reconstruction