Faculty Bibliography

While single-shot late gadolinium enhancement (LGE) is useful for imaging patients with arrhythmia and/or dyspnea, it produces low spatial resolution. One approach to improve spatial resolution is to accelerate data acquisition using compressed sensing (CS). Our previous work described a single-shot, multi-inversion time (TI) LGE pulse sequence using radial k-space sampling and CS, but over-regularization resulted in significant image blurring that muted the benefits of data acceleration. The purpose of the present study was to improve the spatial resolution of the single-shot, multi-TI LGE pulse sequence by incorporating view sharing (VS) and k-space weighted contrast (KWIC) filtering into a GRASP-Pro reconstruction. In 24 patients (mean age = 61 ± 16 years; 9/15 females/males), we compared the performance of our improved multi-TI LGE and standard multi-TI LGE, where clinical standard LGE was used as a reference. Two clinical raters independently graded multi-TI images and clinical LGE images visually on a five-point Likert scale (1, nondiagnostic; 3, clinically acceptable; 5, best) for three categories: the conspicuity of myocardium or scar, artifact, and noise. The summed visual score (SVS) was defined as the sum of the three scores. Myocardial scar volume was quantified using the full-width at half-maximum method. The SVS was not significantly different between clinical breath-holding LGE (median 13.5, IQR 1.3) and multi-TI LGE (median 12.5, IQR 1.6) (P = 0.068). The myocardial scar volumes measured from clinical standard LGE and multi-TI LGE were strongly correlated (coefficient of determination, R²  = 0.99) and in good agreement (mean difference = 0.11%, lower limit of the agreement = -2.13%, upper limit of the agreement = 2.34%). The inter-rater agreement in myocardial scar volume quantification was strong (intraclass correlation coefficient = 0.79). The incorporation of VS and KWIC into GRASP-Pro improved spatial resolution. Our improved 25-fold accelerated, single-shot LGE sequence produces clinically acceptable image quality, multi-TI reconstruction, and accurate myocardial scar volume quantification.

The rapid rise of artificial intelligence (AI) in medicine in the last few years highlights the importance of developing bigger and better systems for data and model sharing. However, the presence of Protected Health Information (PHI) in medical data poses a challenge when it comes to sharing. One potential solution to mitigate the risk of PHI breaches is to exclusively share pre-trained models developed using private datasets. Despite the availability of these pre-trained networks, there remains a need for an adaptable environment to test and fine-tune specific models tailored for clinical tasks. This environment should be open for peer testing, feedback, and continuous model refinement, allowing dynamic model updates that are especially important in the medical field, where diseases and scanning techniques evolve rapidly. In this context, the Discovery Viewer (DV) platform was developed in-house at the Biomedical Engineering and Imaging Institute at Mount Sinai (BMEII) to facilitate the creation and distribution of cutting-edge medical AI models that remain accessible after their development. The all-in-one platform offers a unique environment for non-AI experts to learn, develop, and share their own deep learning (DL) concepts. This paper presents various use cases of the platform, with its primary goal being to demonstrate how DV holds the potential to empower individuals without expertise in AI to create high-performing DL models. We tasked three non-AI experts to develop different musculoskeletal AI projects that encompassed segmentation, regression, and classification tasks. In each project, 80% of the samples were provided with a subset of these samples annotated to aid the volunteers in understanding the expected annotation task. Subsequently, they were responsible for annotating the remaining samples and training their models through the platform's "Training Module". The resulting models were then tested on the separate 20% hold-off dataset to assess their performance. The classification model achieved an accuracy of 0.94, a sensitivity of 0.92, and a specificity of 1. The regression model yielded a mean absolute error of 14.27 pixels. And the segmentation model attained a Dice Score of 0.93, with a sensitivity of 0.9 and a specificity of 0.99. This initiative seeks to broaden the community of medical AI model developers and democratize the access of this technology to all stakeholders. The ultimate goal is to facilitate the transition of medical AI models from research to clinical settings.

The rapid rise of artificial intelligence (AI) in medicine in the last few years highlights the importance of developing bigger and better systems for data and model sharing. However, the presence of Protected Health Information (PHI) in medical data poses a challenge when it comes to sharing. One potential solution to mitigate the risk of PHI breaches is to exclusively share pre-trained models developed using private datasets. Despite the availability of these pre-trained networks, there remains a need for an adaptable environment to test and fine-tune specific models tailored for clinical tasks. This environment should be open for peer testing, feedback, and continuous model refinement, allowing dynamic model updates that are especially important in the medical field, where diseases and scanning techniques evolve rapidly. In this context, the Discovery Viewer (DV) platform was developed in-house at the Biomedical Engineering and Imaging Institute at Mount Sinai (BMEII) to facilitate the creation and distribution of cutting-edge medical AI models that remain accessible after their development. The all-in-one platform offers a unique environment for non-AI experts to learn, develop, and share their own deep learning (DL) concepts. This paper presents various use cases of the platform, with its primary goal being to demonstrate how DV holds the potential to empower individuals without expertise in AI to create high-performing DL models. We tasked three non-AI experts to develop different musculoskeletal AI projects that encompassed segmentation, regression, and classification tasks. In each project, 80% of the samples were provided with a subset of these samples annotated to aid the volunteers in understanding the expected annotation task. Subsequently, they were responsible for annotating the remaining samples and training their models through the platform"™s "Training Module". The resulting models were then tested on the separate 20% hold-off dataset to assess their performance. The classification model achieved an accuracy of 0.94, a sensitivity of 0.92, and a specificity of 1. The regression model yielded a mean absolute error of 14.27 pixels. And the segmentation model attained a Dice Score of 0.93, with a sensitivity of 0.9 and a specificity of 0.99. This initiative seeks to broaden the community of medical AI model developers and democratize the access of this technology to all stakeholders. The ultimate goal is to facilitate the transition of medical AI models from research to clinical settings.

PURPOSE/OBJECTIVE:To propose a framework called live-view golden-angle radial sparse parallel (GRASP) MRI for low-latency and high-fidelity real-time volumetric MRI. METHODS:Live-view GRASP MRI has two stages. The first one is called an off-view stage and the second one is called a live-view stage. In the off-view stage, 3D k-space data and 2D navigators are acquired alternatively using a new navi-stack-of-stars sampling scheme. A 4D motion database is then generated that contains time-resolved MR images at a sub-second temporal resolution, and each image is linked to a 2D navigator. In the live-view stage, only 2D navigators are acquired. At each time point, a live-view 2D navigator is matched to all the off-view 2D navigators. A 3D image that is linked to the best-matched off-view 2D navigator is then selected for this time point. This framework places the typical acquisition and reconstruction burden of MRI in the off-view stage, enabling low-latency real-time 3D imaging in the live-view stage. The accuracy of live-view GRASP MRI and the robustness of 2D navigators for characterizing respiratory variations and/or body movements were assessed. RESULTS:Live-view GRASP MRI can efficiently generate real-time volumetric images that match well with the ground-truth references, with an imaging latency below 500 ms. Compared to 1D navigators, 2D navigators enable more reliable characterization of respiratory variations and/or body movements that may occur throughout the two imaging stages. CONCLUSION/CONCLUSIONS:Live-view GRASP MRI represents a novel, accurate, and robust framework for real-time volumetric imaging, which can potentially be applied for motion adaptive radiotherapy on MRI-Linac.

PURPOSE/OBJECTIVE:mapping without TD. THEORY AND METHODS/METHODS: RESULTS:estimation. The technique is also robust against slight variation in spatial resolution, imaging orientation and scanner platform. CONCLUSION/CONCLUSIONS:mapping.

This work aimed to develop a modified stack-of-stars golden-angle radial sampling scheme with variable-density acceleration along the slice (kz) dimension (referred to as VD-stack-of-stars) and to test this new sampling trajectory with multi-coil compressed sensing reconstruction for rapid motion-robust 3D liver MRI. VD-stack-of-stars sampling implements additional variable-density undersampling along the kz dimension, so that slice resolution (or volumetric coverage) can be increased without prolonging scan time. The new sampling trajectory (with increased slice resolution) was compared with standard stack-of-stars sampling with fully sampled kz (with standard slice resolution) in both non-contrast-enhanced free-breathing liver MRI and dynamic contrast-enhanced MRI (DCE-MRI) of the liver in volunteers. For both sampling trajectories, respiratory motion was extracted from the acquired radial data, and images were reconstructed using motion-compensated (respiratory-resolved or respiratory-weighted) dynamic radial compressed sensing reconstruction techniques. Qualitative image quality assessment (visual assessment by experienced radiologists) and quantitative analysis (as a metric of image sharpness) were performed to compare images acquired using the new and standard stack-of-stars sampling trajectories. Compared to standard stack-of-stars sampling, both non-contrast-enhanced and DCE liver MR images acquired with VD-stack-of-stars sampling presented improved overall image quality, sharper liver edges and increased hepatic vessel clarity in all image planes. The results have suggested that the proposed VD-stack-of-stars sampling scheme can achieve improved performance (increased slice resolution or volumetric coverage with better image quality) over standard stack-of-stars sampling in free-breathing DCE-MRI without increasing scan time. The reformatted coronal and sagittal images with better slice resolution may provide added clinical value.

Patients recovered from COVID-19 may develop long-COVID symptoms in the lung. For this patient population (post-COVID patients), they may benefit from longitudinal, radiation-free lung MRI exams for monitoring lung lesion development and progression. The purpose of this study was to investigate the performance of a spiral ultrashort echo time MRI sequence (Spiral-VIBE-UTE) in a cohort of post-COVID patients in comparison with CT and to compare image quality obtained using different spiral MRI acquisition protocols. Lung MRI was performed in 36 post-COVID patients with different acquisition protocols, including different spiral sampling reordering schemes (line in partition or partition in line) and different breath-hold positions (inspiration or expiration). Three experienced chest radiologists independently scored all the MR images for different pulmonary structures. Lung MR images from spiral acquisition protocol that received the highest image quality scores were also compared against corresponding CT images in 27 patients for evaluating diagnostic image quality and lesion identification. Spiral-VIBE-UTE MRI acquired with the line in partition reordering scheme in an inspiratory breath-holding position achieved the highest image quality scores (score range = 2.17-3.69) compared to others (score range = 1.7-3.29). Compared to corresponding chest CT images, three readers found that 81.5% (22 out of 27), 81.5% (22 out of 27) and 37% (10 out of 27) of the MR images were useful, respectively. Meanwhile, they all agreed that MRI could identify significant lesions in the lungs. The Spiral-VIBE-UTE sequence allows for fast imaging of the lung in a single breath hold. It could be a valuable tool for lung imaging without radiation and could provide great value for managing different lung diseases including assessment of post-COVID lesions.