Faculty Bibliography

Optimal management of distal radial fractures is a controversial topic. Defining the "elderly'' patient is arbitrary and often requires a thorough assessment of activity and function to decide between nonoperative and operative intervention. In this review, we discuss our algorithm and indications for operative treatment, along with the parameters to continue to nonoperative management. Furthermore, we review tips and tricks to avoid pitfalls for operative intervention. In this unique, but growing patient population, optimal results can be achieved with both nonoperative and operative management, with paramount importance relying on specific indications based on activity and function.

"Joining a practice for the first time after training, whether in academia or the private sector is fraught with challenges and a learning curve. Postgraduate education has not sufficiently taught anyone how to manage the nuances of this new arena, or completely how to become successful. Success is not solely a function measured by reportable taxable income. Respect by colleagues, patients, partners, and staff are just as important, if not more so, and the financial attributes will be realized if the tangibles and intangibles discussed are appropriately executed in the correct environment." Although the preceding statements were made as reflecting on the first year of practice, they hold true 10 years later, and always. This article discusses what can be learned from a decade of "doing" even when having "planned well." Some concepts that have not changed are maintained throughout, some have been updated from experience, and some have been completely changed. Just remember, what you do should be dynamic and adaptable over time, but the principles, if sound from the start, never change.

Insertion of locking screws through the proximal thigh while locking retrograde femoral nails is arguably more difficult and traumatic to local tissues than locking at other intramedullary nail sites. The purpose of this study was to evaluate whether a "standard" screw length for proximal interlocking of retrograde nails is possible, therefore assessing whether the act of measuring for these screws can be omitted. This article retrospective evaluates screw position and estimated proximal locking screw length in patients undergoing retrograde nailing using a large radiographically measured computed tomography cohort, with validation through a smaller clinical cohort. According to these data, it seems reasonable to skip depth gauge measurement during anteroposterior interlocking of retrograde femoral nails and insert a standard length screw based on location relative to the lesser trochanter. This should decrease the amount of local trauma to the patient at the locking screw site while increasing operating room efficiency by avoiding what can often become a difficult step during the procedure.

The use of adjunct plate fixation is known to be a useful reduction aid during intramedullary nailing of the proximal tibia. We have expanded the indications beyond aiding the reduction and now use these plates as an adjunct to intramedullary nailing during the healing period. Specific indications include diaphyseal tibial fractures with severe bone loss/comminution and segmental tibial fractures with or without intraarticular extension. We believe the adjunctive permanent plate fixation technique may offer a treatment solution in these selected situations with the added benefit of immediate weight bearing.

BACKGROUND: To review the results of plating of various fracture patterns of proximal ulna fractures including isolated olecranon fractures, olecranon fractures combined with a coronoid fracture, and olecranon fractures combined with a coronoid and radial head fracture. MATERIALS AND METHODS: The study included 38 patients with either an isolated olecranon fracture or combined injuries, all treated with open reduction and internal fixation of the olecranon. Other procedures were performed as needed, including radial head fixation or arthroplasty, fixation of the coronoid, and repair of the lateral collateral ligament complex. There were 27 men and 11 women with an average age of 49 years. Clinical and radiographic assessment was obtained at an average follow-up time of 15 and 8.4 months, respectively. RESULTS: All fractures healed within 5 months. The average arc of ulnohumeral motion was 91 degrees (range 0 degrees -140 degrees ); average pronation-supination arc was 128 degrees (range 0 degrees -180 degrees ). Subgroup analysis showed a statistically significant lower rotational motion arc in patients with associated radial head (73 degrees ) or coronoid fractures (68 degrees ) compared to isolated olecranon fractures. All other parameters including ulnohumeral motion, complication rate, and revision rate were similar among the groups. CONCLUSIONS: A stable, functional elbow can be restored in most patients with proximal ulna fractures treated with open reduction and internal fixation. Loss of full flexion is likely with high-energy trauma, complex fracture patterns, and concomitant injuries. Fracture patterns involving the coronoid and/or the radial head are associated with restricted forearm rotation. LEVEL OF EVIDENCE: III.

Tibial plateau fractures present in a wide spectrum of injury severity and pattern, each requiring a different approach and strategy to achieve good clinical outcomes. Achieving those outcomes starts with a thorough evaluation and preoperative planning period, which leads to choosing the most appropriate surgical approach and fixation strategy. Through a case-based approach, this article presents the necessary pearls, techniques, and strategies to maximize outcomes and minimize complications for some of the more commonly presenting plateau fracture patterns.

BACKGROUND: High-energy radial head injuries often present with a large partial articular displaced fragment with any number of surrounding injuries. The objective of the study was to determine the characteristics of large fragment, partial articular radial head fractures and determine any significant correlation with specific injury patterns. MATERIALS AND METHODS: Patients sustaining a radial head fracture from 2002-2010 were screened for participation. Twenty-five patients with documented partial articular radial head fractures were identified and completed the study. Our main outcome measurement was computed tomography (CT)-based analysis of the radial head fracture. The location of the radial head fracture fragment was evaluated from the axial CT scan in relation to the radial tuberosity used as a reference point. The fragment was characterized by location as anteromedial (AM), anterolateral (AL), posteromedial (PM) or posterolateral (PL) with the tuberosity referenced as straight posterior. All measurements were performed by a blinded, third party hand and upper extremity fellowship trained orthopedic surgeon. Fracture pattern, location, and size were then correlated with possible associated injuries obtained from prospective clinical data. RESULTS: The radial head fracture fragments were most commonly within the AL quadrant (16/25; 64 %). Seven fracture fragments were in the AM quadrant and two in the PM quadrant. The fragment size averaged 42.5 % of the articular surface and spanned an average angle of 134.4 degrees . Significant differences were noted between AM (49.5 %) and AL (40.3 %) fracture fragment size with the AM fragments being larger. Seventeen cases had associated coronoid fractures. Of the total 25 cases, 13 had fracture dislocations while 12 remained reduced following the injury. The rate of dislocation was highest in radial head fractures that involved the AM quadrant (6/7; 85.7 %) compared to the AL quadrant (7/16; 43.7 %). No dislocations were observed with PM fragments. Ten of the 13 (78 %) fracture dislocations had associated lateral collateral ligament (LCL)/medial collateral ligament tear. The most common associated injuries were coronoid fractures (68 %), dislocations (52 %), and LCL tears (44 %). CONCLUSION: The most common location for partial articular radial head fractures is the AL quadrant. The rate of elbow dislocation was highest in fractures involving the AM quadrant. Cases with large fragment, partial articular radial head fractures should undergo a CT scan; if associated with >30 % or >120 degrees fracture arc, then the patient should be assessed closely for obvious or occult instability. These are key associations that hopefully greatly aid in the consultation and preoperative planning settings. LEVEL OF EVIDENCE: Diagnostic III.

BACKGROUND: Recombinant human bone morphogenetic protein-2 (rhBMP-2) is particularly effective in improving osteogenesis in patients with diminished bone healing capabilities, such as individuals with type 1 diabetes mellitus (T1DM) who have impaired bone healing capabilities and increased risk of developing osteoporosis. This study measured the effects of rhBMP-2 treatment on osteogenesis by observing the dose-dependent effect of localized delivery of rhBMP-2 on biomechanical parameters of bone using a hydroxyapatite/tri-calcium phosphate (HA/TCP) carrier in a T1DM-related osteoporosis animal model. MATERIALS AND METHODS: Two different doses of rhBMP-2 (LD low dose, HD high dose) with a HA/TCP carrier were injected into the femoral intramedullary canal of rats with T1DM-related osteoporosis. Two more diabetic rat groups were injected with saline alone and with HA/TCP carrier alone. Radiographs and micro-computed tomography were utilized for qualitative assessment of bone mineral density (BMD). Biomechanical testing occurred at 4- and 8-week time points; parameters tested included torque to failure, torsional rigidity, shear stress, and shear modulus. RESULTS: At the 4-week time point, the LD and HD groups both exhibited significantly higher BMD than controls; at the 8-week time point, the HD group exhibited significantly higher BMD than controls. Biomechanical testing revealed dose-dependent, higher trends in all parameters tested at the 4- and 8-week time points, with minimal significant differences. CONCLUSIONS: Groups treated with rhBMP-2 demonstrated improved bone mineral density at both 4 and 8 weeks compared to control saline groups, in addition to strong trends towards improvement of intrinsic and extrinsic biomechanical properties when compared to control groups. Data revealed trends toward dose-dependent increases in peak torque, torsional rigidity, shear stress, and shear modulus 4 weeks after rhBMP-2 treatment. LEVEL OF EVIDENCE: Not applicable.

Negative pressure wound therapy (NPWT) is a useful management tool in the treatment of traumatic wounds and high-risk incisions after surgery. Since its development nearly 2 decades ago, uses and indications of NPWT have expanded, allowing its use in a variety of clinical scenarios. In addition to providing a brief summary on its mechanism of action, this article provides a focused, algorithmic approach on the use of NPWT by reviewing the available data, the appropriate clinical scenarios and indications, and the specific strategies that can be used to maximize outcomes.

Treatment of subtrochanteric fracture remains a challenge, but evolution of strategy has allowed for reliable results with low complications. Although several fixation options exist, reamed, antegrade intramedullary nailing (IMN) has evolved as the standard of care. Cognizant effort to achieve anatomic reduction before IMN passage allows for desired outcomes. Several reduction techniques can be used to overcome the deforming forces present in the proximal femur to allow for proper IMN placement. The purpose of this article is to review the tips, tricks, and pitfalls to avoid in the treatment of subtrochanteric femur fractures with IMN.