Faculty Bibliography

BACKGROUND:The established safety and efficacy of tranexamic acid (TXA) in minimizing perioperative blood loss has led to increased interest within plastic surgery. Prior studies demonstrate decreased edema, ecchymosis, and reduced rates of postoperative collections with administration of TXA, however its use has not been reported in gender-affirming mastectomy. This represents the first study to evaluate the impact of TXA on postoperative outcomes in patients undergoing gender-affirming mastectomy. METHODS:A single-center cohort study was performed analyzing all consecutive patients undergoing top surgery with the senior author between February 2017 and October 2022. Beginning in June 2021, all patients received 1000 mg intravenous TXA prior to incision and 1000 mg at the conclusion of the procedure. Patients were stratified according to intraoperative administration of TXA, with demographics, surgical characteristics, and postoperative outcomes compared between groups. RESULTS:A total of 851 patients underwent gender-affirming mastectomy. Of these, 646 cases were performed without TXA, while 205 patients received intravenous TXA intraoperatively as above. Patients who received TXA had significantly lower rates of seroma (20.5% vs. 33.0%; p<0.001), and hematoma (0.5% vs. 5.7%; p=0.002). There was no difference in rates of surgical site infection (p=0.74), and use of TXA was not associated with increased rates of venous thromboembolism (p=0.42). CONCLUSIONS:Intraoperative administration of TXA in patients undergoing top surgery may safely reduce the risk of postoperative seroma and hematoma without increased risk of thromboembolic events. Additional data collection and prospective studies are warranted to corroborate these findings.

PURPOSE/OBJECTIVE:Gingivoperiosteoplasty (GPP) can avoid secondary alveolar bone graft in up to 60% of patients. The effects of GPP on maxillary growth are a concern. However, palatoplasty can also negatively impact facial growth. This study quantifies the isolated effects of GPP and cleft palate repair on maxillary growth at the age of mixed dentition. METHODS:A single institution, retrospective study of all patients undergoing primary reconstruction for unilateral cleft lip and alveolus (CLA) or cleft lip and palate (CLP) was performed. Study patients had lateral cephalograms at age of mixed dentition. Patients were stratified into four groups: CLA with GPP (CLA+GPP), CLA without GPP (CLA-GPP), CLP with GPP (CLP+GPP), and CLP without GPP (CLP-GPP). Cephalometric measurements included: sella-nasion-point A (SNA), sella-nasion-point B (SNB), and A point-nasion-B point (ANB). Landmarks were compared between patient groups and to Eurocleft Center D data. RESULTS:110 patients met inclusion criteria: 7 CLA-GPP, 16 CLA+GPP, 24 CLP-GPP, and 63 CLP+GPP patients. There were no significant differences in SNA, SNB, and ANB between CLA+GPP and CLA-GPP, or between CLP+GPP and CLP-GPP groups. In patients who did not receive GPP, SNA was significantly lower in patients with a cleft palate compared to patients with an intact palate (p < 0.05). There were no significant differences in SNA or SNB of CLP-GPP or CLP+GPP groups when compared to Eurocleft data. CONCLUSION/CONCLUSIONS:When controlling for the effects of cleft palate repair, GPP does not appear to negatively affect midface growth at the age of mixed dentition.

BACKGROUND:Out of nearly 90 hand and 50 face transplant recipients, only 5 have received a cross-sex vascularized composite allotransplantation (CS-VCA) to date. CS-VCA has the potential to expand the donor pool and has been shown to be anatomically feasible and ethically acceptable in previous cadaveric and survey studies. However, there is a lack of immunologic data. This study aims to evaluate the immunologic feasibility of CS-VCA through analysis of the solid organ transplant (SOT) literature, given the paucity of CS-VCA data. We hypothesize the rates of acute rejection (AR) and graft survival (GS) in CS vs. same-sex (SS)-SOT to be similar. METHODS:A systematic review and meta-analysis of the PubMed, EMBASE, and Cochrane databases were performed in accordance with PRISMA guidelines. Studies comparing GS or AR episodes in CS- and SS- adult kidney (KT) and liver transplant (LT) populations were included. Odds ratios were calculated for overall GS and AR for all SS and CS transplant combinations (male-to-female (MTF), female-to-male (FTM) and overall). RESULTS:A total of 693 articles were initially identified and 25 studies were included in the meta-analysis. No significant difference in GS was noted between SS-KT vs. CS-KT (OR 1.04 [1.00, 1.07]; P=0.07), SS-KT vs. MTF-KT (OR 0.97 [0.90, 1.04]; P=0.41) and SS-LT vs. MTF-LT (OR 0.95 [0.91, 1.00]; P=0.05). No significant difference in AR was noted between SS-KT vs. MTF-KT (OR 0.99 [0.96, 1.02]; P=0.57), SS-LT vs. CS-LT (OR 0.78 [0.53, 1.16]; P=0.22) and SS-LT vs. FTM-LT (OR 1.03 [0.95, 1.12]; P=0.47). For the remaining pairings, GS was significantly increased and AR was significantly decreased in the SS transplants. CONCLUSIONS:Published data suggest immunologic feasibility of CS-KT and CS-LT, with the potential for generalization to the VCA population. In theory, CS-VCA could expand the potential donor pool, leading to decreased wait times for recipients.

PURPOSE/OBJECTIVE:Our institution was an early adopter of 5-fraction accelerated partial breast irradiation (ABPI) to treat women with early-stage breast cancer. This study reports long-term oncologic and cosmetic outcomes. METHODS:We included patients receiving APBI 600 cGy × 5 fx delivered every other day or every day between 2010 and 2022. Logistic regression models were used to identify factors associated with development of late toxicities, clinician, and patient-rated cosmesis. Kaplan-Meier methodology was used to calculate overall survival (OS), disease-free survival (DFS), and locoregional recurrence-free survival (LR-RFS). RESULTS:442 patients received APBI either daily (56%) or every other day (44%) in the prone position (92%). At a median follow-up of 48 months (range: 5.96-155 months), 12 (2.7%) patients developed a local recurrence (LR). Out of 258 patients with > 3-month toxicity data available, the most common late grade ≥ 2 adverse event was breast fibrosis (6.2%). On multivariate analysis, daily APBI treatment (vs every other day) did not correlate with an increased risk of any late grade ≥ 2 toxicity though it did correlate with a lower risk of any late grade ≥ 2 fibrosis. Overall, at a median follow-up of 80 months, the rates of good-excellent physician and patient-rated cosmesis were 95% and 85%, respectively, with no difference between patients treated on consecutive vs. every other day. On multivariate analysis, patients who did not receive any adjuvant therapy were at increased risk of developing a LR. Five-year OS, LRFS, and DFS were 97.2%, 97.7%, and 89.5%, respectively. CONCLUSIONS:Five-fraction APBI delivered primarily in the prone position either daily or every other day was effective with low rates of local recurrence, minimal toxicity, and excellent cosmesis at long-term follow-up.

There is an ever-evolving need of customized, anatomic-specific grafting materials for bone regeneration. More specifically, biocompatible and osteoconductive materials, that may be configured dynamically to fit and fill defects, through the application of an external stimulus. The objective of this study was to establish a basis for the development of direct inkjet writing (DIW)-based shape memory polymer-ceramic composites for bone tissue regeneration applications and to establish material behavior under thermomechanical loading. Polymer-ceramic (polylactic acid [PLA]/β-tricalcium phosphate [β-TCP]) colloidal gels were prepared of different w/w ratios (90/10, 80/20, 70/30, 60/40, and 50/50) through polymer dissolution in acetone (15% w/v). Cytocompatibility was analyzed through Presto Blue assays. Rheological properties of the colloidal gels were measured to determine shear-thinning capabilities. Gels were then extruded through a custom-built DIW printer. Space filling constructs of the gels were printed and subjected to thermomechanical characterization to measure shape fixity (R_f) and shape recovery (R_r) ratios through five successive shape memory cycles. The polymer-ceramic composite gels exhibited shear-thinning capabilities for extrusion through a nozzle for DIW. A significant increase in cellular viability was observed with the addition of β-TCP particles within the polymer matrix relative to pure PLA. Shape memory effect in the printed constructs was repeatable up to 4 cycles followed by permanent deformation. While further research on scaffold macro-/micro-geometries, and engineered porosities are warranted, this proof-of-concept study suggested suitability of this polymer-ceramic material and the DIW 3D printing workflow for the production of customized, patient specific constructs for bone tissue engineering.

BACKGROUND:The effectiveness of virtual-reality (VR) simulation-based training in cleft surgery has not been tested. The purpose of this study was to evaluate learners' acceptance of VR simulation in airway management of a pediatric patient post-cleft palate repair. METHODS:This VR simulation was developed through collaboration between BioDigital and Smile Train. 26 medical students from a single institution completed 10 min of standardized VR training and 5 min of standardized discussion about airway management post-cleft palate repair. They spent 4-8 min in the VR simulation with guidance from a cleft surgery expert. Participants completed pre- and post-surveys evaluating confidence in using VR as an educational tool, understanding of airway management, and opinions on VR in surgical education. Satisfaction was evaluated using a modified Student Evaluation of Educational Quality questionnaire and scored on a 5-point Likert scale. Wilcoxon signed-rank tests were performed to evaluate responses. RESULTS: < .001). Respondents' opinions on incorporating VR in surgical education started high and did not change significantly post-simulation. Participants were satisfied with VR-based simulation and reported it was stimulating (4.31 ± 0.88), increased interest (3.77 ± 1.21), enhanced learning (4.12 ± 1.05), was clear (4.15 ± 0.97), was effective in teaching (4.08 ± 0.81), and would recommend the simulation (4.2 ± 1.04). CONCLUSION/CONCLUSIONS:VR-based simulation can significantly increase learners' confidence and skills in airway management post-cleft palate repair. Learners find VR to be effective and recommend its incorporation in surgical education.

Three-dimensional printing (3DP) technology has revolutionized the field of the use of bioceramics for maxillofacial and periodontal applications, offering unprecedented control over the shape, size, and structure of bioceramic implants. In addition, bioceramics have become attractive materials for these applications due to their biocompatibility, biostability, and favorable mechanical properties. However, despite their advantages, bioceramic implants are still associated with inferior biological performance issues after implantation, such as slow osseointegration, inadequate tissue response, and an increased risk of implant failure. To address these challenges, researchers have been developing strategies to improve the biological performance of 3D-printed bioceramic implants. The purpose of this review is to provide an overview of 3DP techniques and strategies for bioceramic materials designed for bone regeneration. The review also addresses the use and incorporation of active biomolecules in 3D-printed bioceramic constructs to stimulate bone regeneration. By controlling the surface roughness and chemical composition of the implant, the construct can be tailored to promote osseointegration and reduce the risk of adverse tissue reactions. Additionally, growth factors, such as bone morphogenic proteins (rhBMP-2) and pharmacologic agent (dipyridamole), can be incorporated to promote the growth of new bone tissue. Incorporating porosity into bioceramic constructs can improve bone tissue formation and the overall biological response of the implant. As such, employing surface modification, combining with other materials, and incorporating the 3DP workflow can lead to better patient healing outcomes.