Faculty Bibliography

BACKGROUND:Infection with the severe acute respiratory syndrome coronavirus-2 (SARSCoV-2), the virus which causes the corona virus disease-2019 (COVID-19) has substantial evidence that patients with pre-existing coronary artery disease (CAD) have an increased risk of serious illness, adverse coronary events, and mortality following infection. The COVID-CT registry will assess whether COVID-19 alters progression of coronary atherosclerotic plaque in patients with previously defined anatomic CAD on coronary computed tomographic angiography (CCTA). Mediators and covariates such as disease severity, inflammation, and neighborhood deprivation will also be assessed. DESIGN/METHODS:The COVID-CT registry is a multicenter, longitudinal observational registry enrolling patients including patients with pre-pandemic atherosclerosis observed by CCTA from New York City and Long Island to determine the impact of COVID-19 infection. The primary aim is to test the hypothesis that patients with previously defined anatomic CAD by CCTA who are subsequently infected with SARS-CoV-2 have accelerated progression of total and noncalcified atherosclerotic plaque volumes when compared to uninfected patients. We hypothesize that systemic inflammation is a key promoter in the formation and progression of atherosclerotic plaque. Additionally, we will test whether measurement of the perivascular fat attenuation index detects high risk, coronary artery inflammation following COVID infection. SUMMARY/CONCLUSIONS:The impact of this first in-kind registry will be foundational for revising standard diagnostic pathways and risk assessment used to guide preventive care for millions of patients with CAD at increased risk from viral infection.

BACKGROUND:Coronary microvascular dysfunction (CMD) is present in approximately 40% of patients with ischemia with no obstructive coronary arteries (INOCA) and has been associated with inflammation. We investigated associations between measures of inflammation of the coronary perivascular adipose tissue assessed by coronary computed tomography angiography (CCTA) and results of invasive coronary function testing (CFT) to diagnose CMD. METHODS:Adults referred for clinically indicated invasive coronary angiography who had less than 50% stenosis in all epicardial arteries were prospectively enrolled. CMD was defined as a coronary flow reserve (CFR) less than 2.5 or index of microvascular resistance (IMR) greater than or equal to 25 using bolus thermodilution in the left anterior descending (LAD) coronary artery. Coronary perivascular fat attenuation index was assessed by CCTA in the right coronary artery (RCA) and LAD. T tests were used to evaluate differences in perivascular FAI by CMD status. RESULTS:A total of 31 participants underwent CFT and CCTA. The mean age was 58 ± 11.7 years, 77% were female, and 61% were white. CMD was present in 15 participants (48%). No differences in perivascular FAI were observed in patients with and without CMD, either in the RCA [-74.2 ± 9.8 vs. -69.9 ± 10.3 Hounsfield units (HU), P = 0.24] or LAD (-76.4 ± 10.2 vs. -74.8 ± 12.7 HU, P = 0.69). Perivascular FAI was not correlated with CFR or IMR measurements in the RCA or LAD. CONCLUSION/CONCLUSIONS:There were no associations between CMD diagnosed by invasive CFT and perivascular FAI by CCTA in patients with INOCA. Further research is needed to understand the relationship between vascular inflammation and CMD in INOCA.

BACKGROUND:Preoperative cardiovascular risk stratification before noncardiac surgery is a common clinical challenge. Coronary artery calcium scores from ECG-gated chest computed tomography (CT) imaging are associated with perioperative events. At the time of preoperative evaluation, many patients will not have had ECG-gated CT imaging, but will have had nongated chest CT studies performed for a variety of noncardiac indications. We evaluated relationships between coronary calcium severity estimated from previous nongated chest CT imaging and perioperative major clinical events (MCE) after noncardiac surgery. METHODS:We retrospectively identified consecutive adults age ≥45 years who underwent in-hospital, major noncardiac surgery from 2016 to 2020 at a large academic health system composed of 4 acute care centers. All patients had nongated (contrast or noncontrast) chest CT imaging performed within 1 year before surgery. Coronary calcium in each vessel was retrospectively graded from absent to severe using a 0 to 3 scale (absent, mild, moderate, severe) by physicians blinded to clinical data. The estimated coronary calcium burden (ECCB) was computed as the sum of scores for each coronary artery (0 to 9 scale). A Revised Cardiac Risk Index was calculated for each patient. Perioperative MCE was defined as all-cause death or myocardial infarction within 30 days of surgery. RESULTS:<0.0001). An ECCB ≥3 was associated with 2-fold higher adjusted odds of MCE versus an ECCB <3 (adjusted odds ratio, 2.11 [95% CI, 1.42-3.12]). CONCLUSIONS:Prevalence and severity of coronary calcium obtained from existing nongated chest CT imaging improve preoperative clinical risk stratification before noncardiac surgery.

Coronary Artery Disease Reporting and Data System (CAD-RADS) was created to standardize reporting system for patients undergoing coronary CT angiography (CCTA) and to guide possible next steps in patient management. The goal of this updated 2022 CAD-RADS 2.0 is to improve the initial reporting system for CCTA by considering new technical developments in Cardiac CT, including data from recent clinical trials and new clinical guidelines. The updated CAD-RADS classification will follow an established framework of stenosis, plaque burden, and modifiers, which will include assessment of lesion-specific ischemia using CT fractional-flow-reserve (CT-FFR) or myocardial CT perfusion (CTP), when performed. Similar to the method used in the original CAD-RADS version, the determinant for stenosis severity classification will be the most severe coronary artery luminal stenosis on a per-patient basis, ranging from CAD-RADS 0 (zero) for absence of any plaque or stenosis to CAD-RADS 5 indicating the presence of at least one totally occluded coronary artery. Given the increasing data supporting the prognostic relevance of coronary plaque burden, this document will provide various methods to estimate and report total plaque burden. The addition of P1 to P4 descriptors are used to denote increasing categories of plaque burden. The main goal of CAD-RADS, which should always be interpreted together with the impression found in the report, remains to facilitate communication of test results with referring physicians along with suggestions for subsequent patient management. In addition, CAD-RADS will continue to provide a framework of standardization that may benefit education, research, peer-review, artificial intelligence development, clinical trial design, population health and quality assurance with the ultimate goal of improving patient care.

Coronary Artery Disease Reporting and Data System (CAD-RADS) was created to standardize reporting system for patients undergoing coronary CT angiography (CCTA) and to guide possible next steps in patient management. The goal of this updated 2022 CAD-RADS 2.0 is to improve the initial reporting system for CCTA by considering new technical developments in Cardiac CT, including data from recent clinical trials and new clinical guidelines. The updated CAD-RADS classification will follow an established framework of stenosis, plaque burden, and modifiers, which will include assessment of lesion-specific ischemia using CT fractional-flow-reserve (CT-FFR) or myocardial CT perfusion (CTP), when performed. Similar to the method used in the original CAD-RADS version, the determinant for stenosis severity classification will be the most severe coronary artery luminal stenosis on a per-patient basis, ranging from CAD-RADS 0 (zero) for absence of any plaque or stenosis to CAD-RADS 5 indicating the presence of at least one totally occluded coronary artery. Given the increasing data supporting the prognostic relevance of coronary plaque burden, this document will provide various methods to estimate and report total plaque burden. The addition of P1 to P4 descriptors are used to denote increasing categories of plaque burden. The main goal of CAD-RADS, which should always be interpreted together with the impression found in the report, remains to facilitate communication of test results with referring physicians along with suggestions for subsequent patient management. In addition, CAD-RADS will continue to provide a framework of standardization that may benefit education, research, peer-review, artificial intelligence development, clinical trial design, population health and quality assurance with the ultimate goal of improving patient care. Keywords: Coronary Artery Disease, Coronary CTA, CAD-RADS, Reporting and Data System, Stenosis Severity, Report Standardization Terminology, Plaque Burden, Ischemia Supplemental material is available for this article. This article is published synchronously in Radiology: Cardiothoracic Imaging, Journal of Cardiovascular Computed Tomography, JACC: Cardiovascular Imaging, Journal of the American College of Radiology, and International Journal for Cardiovascular Imaging. © 2022 Society of Cardiovascular Computed Tomography. Published by RSNA with permission.

Coronary Artery Disease Reporting and Data System (CAD-RADS) was created to standardize reporting system for patients undergoing coronary CT angiography (CCTA) and to guide possible next steps in patient management. The goal of this updated 2022 CAD-RADS 2.0 is to improve the initial reporting system for CCTA by considering new technical developments in Cardiac CT, including data from recent clinical trials and new clinical guidelines. The updated CAD-RADS classification will follow an established framework of stenosis, plaque burden, and modifiers, which will include assessment of lesion-specific ischemia using CT fractional-flow-reserve (CT-FFR) or myocardial CT perfusion (CTP), when performed. Similar to the method used in the original CAD-RADS version, the determinant for stenosis severity classification will be the most severe coronary artery luminal stenosis on a per-patient basis, ranging from CAD-RADS 0 (zero) for absence of any plaque or stenosis to CAD-RADS 5 indicating the presence of at least one totally occluded coronary artery. Given the increasing data supporting the prognostic relevance of coronary plaque burden, this document will provide various methods to estimate and report total plaque burden. The addition of P1 to P4 descriptors are used to denote increasing categories of plaque burden. The main goal of CAD-RADS, which should always be interpreted together with the impression found in the report, remains to facilitate communication of test results with referring physicians along with suggestions for subsequent patient management. In addition, CAD-RADS will continue to provide a framework of standardization that may benefit education, research, peer-review, artificial intelligence development, clinical trial design, population health and quality assurance with the ultimate goal of improving patient care.

Coronary Artery Disease Reporting and Data System (CAD-RADS) was created to standardize reporting system for patients undergoing coronary CT angiography (CCTA) and to guide possible next steps in patient management. The goal of this updated 2022 CAD-RADS 2.0 is to improve the initial reporting system for CCTA by considering new technical developments in Cardiac CT, including data from recent clinical trials and new clinical guidelines. The updated CAD-RADS classification will follow an established framework of stenosis, plaque burden, and modifiers, which will include assessment of lesion-specific ischemia using CT fractional-flow-reserve (CT-FFR) or myocardial CT perfusion (CTP), when performed. Similar to the method used in the original CAD-RADS version, the determinant for stenosis severity classification will be the most severe coronary artery luminal stenosis on a per-patient basis, ranging from CAD-RADS 0 (zero) for absence of any plaque or stenosis to CAD-RADS 5 indicating the presence of at least one totally occluded coronary artery. Given the increasing data supporting the prognostic relevance of coronary plaque burden, this document will provide various methods to estimate and report total plaque burden. The addition of P1 to P4 descriptors are used to denote increasing categories of plaque burden. The main goal of CAD-RADS, which should always be interpreted together with the impression found in the report, remains to facilitate communication of test results with referring physicians along with suggestions for subsequent patient management. In addition, CAD-RADS will continue to provide a framework of standardization that may benefit education, research, peer-review, artificial intelligence development, clinical trial design, population health and quality assurance with the ultimate goal of improving patient care.

OBJECTIVE. The objective of this article is to assess radiologist concordance in characterizing thyroid nodules using the American College of Radiology Thyroid Imaging Reporting and Data System (TI-RADS), focusing on the effect of radiologist experience on reader concordance. MATERIALS AND METHODS. Three experienced and three less experienced radiologists assessed 150 thyroid nodules using the TI-RADS lexicon. Percent concordance was determined for various endpoints. RESULTS. Interreader concordance for the five TI-RADS categories was 87.2% for shape, 81.2% for composition, 76.1% for echogenicity, 72.9% for margins, and 69.8% for echogenic foci. Concordance for individual features was 96.3% for rim calcifications, 90.8% for macrocalcifications, 90.1% for spongiform, 83.5% for comet tail artifact, and 77.7% for punctate echogenic foci. Concordance for the TI-RADS level and recommendation for fine-needle aspiration (FNA) were 50.4% and 78.9%, respectively. Concordance was significantly (p < 0.05) higher for less experienced readers in identifying margins (84.3% vs 67.4%), echogenic foci (76.9% vs 69.3%), comet tail artifact (89.6% vs 79.2%), and punctate echogenic foci (85.3% vs 75.5%), and lower for peripheral rim calcifications (95.0% vs 97.8 %), but was not different (p > 0.05) for the remaining categories and features. CONCLUSION. A range of TI-RADS categories, features, and recommendations for FNA had generally moderate interreader agreement among six radiologists. Our results show that concordance for numerous characteristics was significantly higher for the less experienced versus the more experienced readers. These results suggest that less experienced readers relied more on the explicit TI-RADS criteria, whereas the experienced radiologists partially relied on their accumulated experience when forming impressions. However, the overall TI-RADS level and recommendation for FNA were unaffected, supporting the robustness of the TI-RADS lexicon and its continued use in practice.

This expert consensus statement from the Society of Cardiovascular Computed Tomography (SCCT) provides an evidence synthesis on the use of computed tomography (CT) imaging for diagnosis and risk stratification of coronary artery disease in women. From large patient and population cohorts of asymptomatic women, detection of any coronary artery calcium that identifies females with a 10-year atherosclerotic cardiovascular disease risk of >7.5% may more effectively triage women who may benefit from pharmacologic therapy. In addition to accurate detection of obstructive coronary artery disease (CAD), CT angiography (CTA) identifies nonobstructive atherosclerotic plaque extent and composition which is otherwise not detected by alternative stress testing modalities. Moreover, CTA has superior risk stratification when compared to stress testing in symptomatic women with stable chest pain (or equivalent) symptoms. For the evaluation of symptomatic women both in the emergency department and the outpatient setting, there is abundant evidence from large observational registries and multi-center randomized trials, that CT imaging is an effective procedure. Although radiation doses are far less for CT when compared to nuclear imaging, radiation dose reduction strategies should be applied in all women undergoing CT imaging. Effective and appropriate use of CT imaging can provide the means for improved detection of at-risk women and thereby focus preventive management resulting in long-term risk reduction and improved clinical outcomes.