Faculty Bibliography

Clinical application of beta-tricalcium phosphate (β-TCP) has been limited by a lack of bone infiltration within its bulk form. Lithography-based ceramic manufacturing (LCM), a novel additive manufacturing (AM) technique, leverages photopolymerization to create β-TCP structures with higher feature resolution and surface quality than traditional techniques. This modality allows for a more efficient and precise means to control implant microarchitecture and macroarchitecture, enabling the production of novel implant configurations. This pilot study explores the bone regenerative capacity of lithography-based ceramic-manufactured 100% β-TCP scaffolds for the repair of critically sized mandibular defects in a skeletally mature rabbit model. Quantitative and qualitative analyses of regenerated bone were performed using micro-computer tomography (micro-CT) and two-dimensional histologic analysis, respectively. Three-dimensional volumetric reconstruction revealed bridging bone in sites treated with β-TCP implants, yielding ~8.6±3.5% of regenerated bone within the construct and ~33±3.2% remaining scaffold volume. Bone regeneration and remaining scaffold quantification were corroborated using traditional two-dimensional histologic micrographs and three-dimensional volumetric analysis (P<0.05). Qualitative histologic analysis revealed vascularized woven and lamellar bone, with no evidence of ectopic bone, excess inflammation, or fracture. Bone regeneration in this short-term rabbit model following a critical-sized mandibular defect repaired with LCM β-TCP scaffolds demonstrated analogous radiographic and histologic properties to native bone.

In an effort to improve bone response, predictably regenerate lost tissue, and provide an anatomically pleasing ridge contour for biomechanically favorable and prosthetically driven implant placement, guided bone regeneration (GBR) procedures have been indicated. This study provides the first direct in vivo comparison of the biocompatibility of an experimental porcine-derived collagen membrane (CMI, Regenity Biosciences, Paramus, NJ, USA) and a commercially available bovine-derived collagen membrane (CopiOs, ZimVie, Palm Beach Gardens, FL, USA) in a beagle mandibular model for the purposes of GBR. Four bilateral defects of 10 mm × 10 mm through the mandibular thickness were placed in each of n = 16 adult beagle dogs. Defects were filled with a deproteinized porcine-derived particulate graft and were covered either with CMI or CopiOs to allow compartmentalized healing. Animals were euthanized after 4, 8, 12, or 16 weeks post-operatively (n = 4 beagles/time point). Bone regenerative capacity, graft, and soft tissue presence were evaluated by histomorphometric and microtomographic analyses. Outcome variables were compared using a mixed model analysis with fixed factor variables of time and material. Qualitatively, no histomorphological differences in healing were observed between the membrane groups at any time point. Histomorphometrically, CMI and CopiOs presented statistically significant differences in bone (mean ± SD: 38.27% ± 15.20 vs. 17.43% ± 15.49, respectively, p = 0.016) and soft tissue presence (mean ± SD: 50.88% ± 11.83 vs. 68.21% ± 16.98, respectively, p = 0.026) at 8 weeks. These results might influence treatment timing in clinical practice, by enabling early implant placement or shorter healing intervals. No significant differences were detected in these parameters at any other healing time point (p > 0.05). CMI and CopiOs showed no signs of adverse immune response and led to similar trends in bone regeneration after 16 weeks of permitted healing. Both membranes minimized soft tissue infiltration and maintained defect stability over the observed healing periods without adverse events such as inflammation and/or foreign body reaction.

Virtual surgical planning (VSP) has revolutionized orthognathic and craniomaxillofacial surgeries by enabling precise 3-dimensional analysis, detailed osteotomy planning, and custom fabrication of surgical guides and fixation hardware. However, the visualization of registration holes-critical for accurate plate fixation-remains challenging, especially in a blood-filled surgical field. This paper presents a novel technique to enhance the visibility of registration holes using Bonney's blue dye. The technique involves injecting micro-aliquots of Bonney's blue dye (a mixture of crystal violet and brilliant green) into the registration holes before performing osteotomies. This approach ensures that the holes remain clearly marked despite potential visual contamination in the surgical field. The dye helps to identify screw placements and align patient-specific fixation plates more accurately. The proposed method addresses common difficulties in aligning registration holes with patient-specific plates during surgery. Bonney's blue dye provides a clear contrast against the bone, making the registration holes more visible and easier to locate. This improvement is particularly advantageous in a bloody surgical field and benefits less experienced surgeons by offering a straightforward solution to enhance accuracy and efficiency. The technique can also reduce overall operative time by minimizing the time spent locating and aligning the registration holes. Utilizing Bonney's blue dye in virtual surgical planning significantly improves the visibility and alignment of registration holes in orthognathic surgeries. This simple, cost-effective method enhances surgical precision and efficiency and can be applied to other computer-assisted surgical procedures in craniofacial surgery.

To develop a peri-implantitis model in a Gottingen minipig and evaluate the effect of local application of salicylic acid poly(anhydride-ester) (SAPAE) on peri-implantitis progression in healthy, metabolic syndrome (MS), and type-2 diabetes mellitus (T2DM) subjects. Eighteen animals were allocated to three groups: (i) control, (ii) MS (diet for obesity induction), and (iii) T2DM (diet plus streptozotocin for T2DM induction). Maxillary and mandible premolars and first molar were extracted. After 3 months of healing, four implants per side were placed in both jaws of each animal. After 2 months, peri-implantitis was induced by plaque formation using silk ligatures. SAPAE polymer was mixed with mineral oil (3.75 mg/μL) and topically applied biweekly for up to 60 days to halt peri-implantitis progression. Periodontal probing was used to assess pocket depth over time, followed by histomorphologic analysis of harvested samples. The adopted protocol resulted in the onset of peri-implantitis, with healthy minipigs taking twice as long to reach the same level of probing depth relative to MS and T2DM subjects (∼3.0 mm), irrespective of jaw. In a qualitative analysis, SAPAE therapy revealed decreased levels of inflammation in the normoglycemic, MS, and T2DM groups. SAPAE application around implants significantly reduced the progression of peri-implantitis after ∼15 days of therapy, with ∼30% lower probing depth for all systemic conditions and similar rates of probing depth increase per week between the control and SAPAE groups. MS and T2DM conditions presented a faster progression of the peri-implant pocket depth. SAPAE treatment reduced peri-implantitis progression in healthy, MS, and T2DM groups.

Three-dimensional printing (3DP) technology has revolutionized the field of the use of bioceramics for maxillofacial and periodontal applications, offering unprecedented control over the shape, size, and structure of bioceramic implants. In addition, bioceramics have become attractive materials for these applications due to their biocompatibility, biostability, and favorable mechanical properties. However, despite their advantages, bioceramic implants are still associated with inferior biological performance issues after implantation, such as slow osseointegration, inadequate tissue response, and an increased risk of implant failure. To address these challenges, researchers have been developing strategies to improve the biological performance of 3D-printed bioceramic implants. The purpose of this review is to provide an overview of 3DP techniques and strategies for bioceramic materials designed for bone regeneration. The review also addresses the use and incorporation of active biomolecules in 3D-printed bioceramic constructs to stimulate bone regeneration. By controlling the surface roughness and chemical composition of the implant, the construct can be tailored to promote osseointegration and reduce the risk of adverse tissue reactions. Additionally, growth factors, such as bone morphogenic proteins (rhBMP-2) and pharmacologic agent (dipyridamole), can be incorporated to promote the growth of new bone tissue. Incorporating porosity into bioceramic constructs can improve bone tissue formation and the overall biological response of the implant. As such, employing surface modification, combining with other materials, and incorporating the 3DP workflow can lead to better patient healing outcomes.

Computer-aided design/computer-aided manufacturing and 3-dimensional (3D) printing techniques have revolutionized the approach to bone tissue engineering for the repair of craniomaxillofacial skeletal defects. Ample research has been performed to gain a fundamental understanding of the optimal 3D-printed scaffold design and composition to facilitate appropriate bone formation and healing. Benchtop and preclinical, small animal model testing of 3D-printed bioactive ceramic scaffolds augmented with pharmacological/biological agents have yielded promising results given their potential combined osteogenic and osteoinductive capacity. However, other factors must be evaluated before newly developed constructs may be considered analogous alternatives to the "gold standard" autologous graft for defect repair. More specifically, the 3D-printed bioactive ceramic scaffold's long-term safety profile, biocompatibility, and resorption kinetics must be studied. The ultimate goal is to successfully regenerate bone that is comparable in volume, density, histologic composition, and mechanical strength to that of native bone. In vivo studies of these newly developed bone tissue engineering in translational animal models continue to make strides toward addressing regulatory and clinically relevant topics. These include the use of skeletally immature animal models to address the challenges posed by craniomaxillofacial defect repair in pediatric patients. This manuscript reviews the most recent preclinical animal studies seeking to assess 3D-printed ceramic scaffolds for improved repair of critical-sized craniofacial bony defects.

Bone tissue has the capacity to regenerate under healthy conditions, but complex cases like critically sized defects hinder natural bone regeneration, necessitating surgery, and use of a grafting material for rehabilitation. The field of bone tissue engineering (BTE) has pioneered ways to address such issues utilizing different biomaterials to create a platform for cell migration and tissue formation, leading to improved bone reconstruction. One such approach involves 3D-printed patient-specific scaffolds designed to aid in regeneration of boney defects. This study aimed to develop and characterize 3D printed scaffolds composed of type I collagen augmented with β-tricalcium phosphate (COL/β-TCP). A custom-built direct inkjet write (DIW) printer was used to fabricate β-TCP, COL, and COL/β-TCP scaffolds using synthesized colloidal gels. After chemical crosslinking, the scaffolds were lyophilized and subjected to several characterization techniques, including light microscopy, scanning electron microscopy, and x-ray diffraction to evaluate morphological and chemical properties. In vitro evaluation was performed using human osteoprogenitor cells to assess cytotoxicity and proliferative capacity of the different scaffold types. Characterization results confirmed the presence of β-TCP in the 3D printed COL/β-TCP scaffolds, which exhibited crystals that were attributed to β-TCP due to the presence of calcium and phosphorus, detected through energy dispersive x-ray spectroscopy. In vitro studies showed that the COL/β-TCP scaffolds yielded more favorable results in terms of cell viability and proliferation compared to β-TCP and COL scaffolds. The novel COL/β-TCP scaffold constructs hold promise for improving BTE applications and may offer a superior environment for bone regeneration compared with conventional COL and β-TCP scaffolds.

To evaluate the cellular response of both an intact fish skin membrane and a porcine-derived collagen membrane and investigate the bone healing response of these membranes using a translational, preclinical, guided-bone regeneration (GBR) canine model. Two different naturally sourced membranes were evaluated in this study: (i) an intact fish skin membrane (Kerecis Oral®, Kerecis) and (ii) a porcine derived collagen (Mucograft®, Geistlich) membrane, positive control. For the in vitro experiments, human osteoprogenitor (hOP) cells were used to assess the cellular viability and proliferation at 24, 48, 72, and 168 h. ALPL, COL1A1, BMP2, and RUNX2 expression levels were analyzed by real-time PCR at 7 and 14 days. The preclinical component was designed to mimic a GBR model in canines (n = 12). The first step was the extraction of premolars (P1-P4) and the 1st molars bilaterally, thereby creating four three-wall box type defects per mandible (two per side). Each defect site was filled with bone grafting material, which was then covered with one of the two membranes (Kerecis Oral® or Mucograft®). The groups were nested within the mandibles of each subject and membranes randomly allocated among the defects to minimize potential site bias. Samples were harvested at 30-, 60-, and 90-days and subjected to computerized microtomography (μCT) for three-dimensional reconstruction to quantify bone formation and graft degradation, in addition to histological processing to qualitatively analyze bone regeneration. Neither the intact fish skin membrane nor porcine-based collagen membrane presented cytotoxic effects. An increase in cell proliferation rate was observed for both membranes, with the Kerecis Oral® outperforming the Mucograft® at the 48- and 168-hour time points. Kerecis Oral® yielded higher ALPL expression relative to Mucograft® at both 7- and 14-day points. Additionally, higher COL1A1 expression was observed for the Kerecis Oral® membrane after 7 days but no differences were detected at 14 days. The membranes yielded similar BMP2 and RUNX2 expression at 7 and 14 days. Volumetric reconstructions and histologic micrographs indicated gradual bone ingrowth along with the presence of particulate bone grafts bridging the defect walls for both Kerecis Oral® and Mucograft® membranes, which allowed for the reestablishment of the mandible shape after 90 days. New bone formation significantly increased from 30 to 60 days, and from 60 to 90 days in vivo, without significant differences between membranes. The amount of bovine grafting material (%) within the defects significantly decreased from 30 to 90 days. Collagen membranes led to an upregulation of cellular proliferation and adhesion along with increased expression of genes associated with bone healing, particularly the intact fish skin membrane. Despite an increase in the bone formation rate in the defect over time, there was no significant difference between the membranes.

BACKGROUND:Condylar adaptations following orthognathic surgery remain an area of interest. Prior studies do not use 3-dimensional imaging modalities and lack standardization in the choice of osteotomy and movement when assessing condylar changes. PURPOSE:The purpose of this study was to use 3-dimensional cephalometry to measure the association between osteotomy type (sagittal split osteotomy [SSO] vs vertical ramus osteotomy [VRO]) and changes in condylar volume and position. STUDY DESIGN, SETTING, AND SAMPLE:This is a retrospective cohort study from January 2021 through December 2022 of patients at Bellevue Hospital in New York City, New York who were treated with either SSO or VRO for the correction of Class III skeletal malocclusion. PREDICTOR/EXPOSURE/INDEPENDENT VARIABLE:The primary predictor was the type of mandibular osteotomy, sagittal split osteotomy, and vertical ramus osteotomy. MAIN OUTCOME VARIABLES:) and relative position (anterior-posterior change utilizing the Pullinger and Hollinder method). COVARIATES:Covariates included patient age, sex, setback magnitude, temporomandibular joint symptoms, and fixation method for SSO patients. ANALYSES:tests. If there were multiple significant univariate predictors, multiple regression models were created to predict volume and position changes. A P < .05 value was considered statistically significant. RESULTS:; P = .03) and positional change (68.2 vs 12.5%; P < .01). Self-reported measures of postoperative pain, internal derangement, and myofascial symptoms were not significantly associated with either volume or positional changes. CONCLUSIONS AND RELEVANCE:The SSO resulted in greater postoperative condylar volume loss and positional changes. These volume and positional changes were not correlated with self-reported temporomandibular disorder symptoms.