Faculty Bibliography

The ability of vaccines to induce memory cytotoxic T-cell responses in the lung is crucial in stemming and treating pulmonary diseases caused by viruses and bacteria. However, most approaches to subunit vaccines produce primarily humoral and only to a lesser extent cellular immune responses. We developed a nanoparticle (NP)-based carrier that, upon delivery to the lung, specifically targets pulmonary dendritic cells, thus enhancing antigen uptake and transport to the draining lymph node; antigen coupling via a disulfide link promotes highly efficient cross-presentation after uptake, inducing potent protective mucosal and systemic CD8(+) T-cell immunity. Pulmonary immunization with NP-conjugated ovalbumin (NP-ova) with CpG induced a threefold enhancement of splenic antigen-specific CD8(+) T cells displaying increased CD107a expression and IFN-γ production compared with immunization with soluble (i.e., unconjugated) ova with CpG. This enhanced response was accompanied by a potent Th17 cytokine profile in CD4(+) T cells. After 50 d, NP-ova and CpG also led to substantial enhancements in memory CD8(+) T-cell effector functions. Importantly, pulmonary vaccination with NP-ova and CpG induced as much as 10-fold increased frequencies of antigen-specific effector CD8(+) T cells to the lung and completely protected mice from morbidity following influenza-ova infection. Here, we highlight recruitment to the lung of a long-lasting pool of protective effector memory cytotoxic T-cells by our disulfide-linked antigen-conjugated NP formulation. These results suggest the reduction-reversible NP system is a highly promising platform for vaccines specifically targeting intracellular pathogens infecting the lung.

Vaccines that drive robust T-cell immunity against Mycobacterium tuberculosis (Mtb) are needed both for prophylactic and therapeutic purposes. We have recently developed a synthetic vaccine delivery platform with Pluronic-stabilized polypropylene sulfide nanoparticles (NPs), which target lymphoid tissues by their small size (∼ 30 nm) and which activate the complement cascade by their surface chemistry. Here we conjugated the tuberculosis antigen Ag85B to the NPs (NP-Ag85B) and compared their efficacy in eliciting relevant immune responses in mice after intradermal or pulmonary administration. Pulmonary administration of NP-Ag85B with the adjuvant CpG led to enhanced induction of antigen-specific polyfunctional Th1 responses in the spleen, the lung and lung-draining lymph nodes as compared to soluble Ag85B with CpG and to the intradermally-delivered formulations. Mucosal and systemic Th17 responses were also observed with this adjuvanted NP formulation and vaccination route, especially in the lung. We then evaluated protection induced by the adjuvanted NP formulation following a Mtb aerosol challenge and found that vaccination with NP-Ag85B and CpG via the pulmonary route displayed a substantial reduction of the lung bacterial burden, both compared to soluble Ag85B with CpG and to the corresponding intradermally delivered formulations. These findings highlight the potential of administrating NP-based formulations by the pulmonary route for TB vaccination.

Although growth factors naturally exert their morphogenetic influences within the context of the extracellular matrix microenvironment, the interactions among growth factors, their receptors, and other extracellular matrix components are typically ignored in clinical delivery of growth factors. We present an approach for engineering the cellular microenvironment to greatly accentuate the effects of vascular endothelial growth factor-A (VEGF-A) and platelet-derived growth factor-BB (PDGF-BB) for skin repair, and of bone morphogenetic protein-2 (BMP-2) and PDGF-BB for bone repair. A multifunctional recombinant fragment of fibronectin (FN) was engineered to comprise (i) a factor XIIIa substrate fibrin-binding sequence, (ii) the 9th to 10th type III FN repeat (FN III9-10) containing the major integrin-binding domain, and (iii) the 12th to 14th type III FN repeat (FN III12-14), which binds growth factors promiscuously, including VEGF-A165, PDGF-BB, and BMP-2. We show potent synergistic signaling and morphogenesis between α5β1 integrin and the growth factor receptors, but only when FN III9-10 and FN III12-14 are proximally presented in the same polypeptide chain (FN III9-10/12-14). The multifunctional FN III9-10/12-14 greatly enhanced the regenerative effects of the growth factors in vivo in a diabetic mouse model of chronic wounds (primarily through an angiogenic mechanism) and in a rat model of critical-size bone defects (through a mesenchymal stem cell recruitment mechanism) at doses where the growth factors delivered within fibrin only had no significant effects.

The vascular network is an integral component of most organs. Beyond assuring an adequate supply of oxygen and nutrients for normal tissue function, vascular structures provide also a critical interface in the balance of tissue homoeostasis and immune functions. Therefore, understanding the biology of the vascular system is a challenging and important objective because it is vital to many physiological and pathological processes. Unravelling mechanisms of blood vessel expansion and remodelling would offer therapeutic options to ameliorate disorders that are currently leading causes of mortality and morbidity, including cardiovascular diseases, cancer, chronic inflammatory disorders, diabetic retinopathy, tissue defects caused by trauma or chronic skin ulcers. This article will review cellular and molecular mechanisms controlling angiogenesis in the light of recent reports and data from our own laboratories. We will focus on the interaction of growth factors with extracellular matrix (ECM) components during the formation of vascular structures in health and disease. Finally, this article will provide a rationale for targeting the ECM-morphogen interplay for therapeutic angiogenesis.

Scaffold materials should favor cell attachment and proliferation, and provide designable 3D structures with appropriate mechanical strength. Collagen matrices have proven to be beneficial scaffolds for tissue regeneration. However, apart from small intestinal submucosa, they offer a limited mechanical strength even if crosslinking can enhance their mechanical properties. A more cell-friendly way to increase material strength is to combine synthetic polymer meshes with plastic compressed collagen gels. This work describes the potential of plastic compressed collagen-poly(lactic acid-co-ɛ-caprolactone) (PLAC) hybrids as scaffolds for bladder tissue regeneration. Human bladder smooth muscle and urothelial cells were cultured on and inside collagen-PLAC hybrids in vitro. Scaffolds were analyzed by electron microscopy, histology, immunohistochemistry, and AlamarBlue assay. Both cell types proliferated in and on the hybrid, forming dense cell layers on top after two weeks. Furthermore, hybrids were implanted subcutaneously in the backs of nude mice. Host cell infiltration, scaffold degradation, and the presence of the seeded bladder cells were analyzed. Hybrids showed a lower inflammatory reaction in vivo than PLAC meshes alone, and first signs of polymer degradation were visible at six months. Collagen-PLAC hybrids have potential for bladder tissue regeneration, as they show efficient cell seeding, proliferation, and good mechanical properties.

Analytical ultracentrifugation (AUC) primarily serves to investigate hydrodynamic and thermodynamic properties of natural and synthetic macromolecules and colloids in solution, dispersion or suspension. Beside such more conventional use, AUC can support materials development particularly by combining different optical systems, if the AUC is equipped with such, or using complementary data evaluation approaches. In this context, an Optima XL-I equipped with absorbance (AO) and interference optics (IO) was used alone or complementary to study the success of conjugation of biopolymers, to evaluate the completeness of the incorporation of macromolecules into micelles and vesicles, and to analyze the composition and homogeneity of macromolecular assemblies. The combination of AO and IO proved covalent binding of concanavalin A to dextran without macromolecular degradation as well as the formation of mixed micelles composed of two types of block copolymers. Further, AUC contributed to analyze the homogeneity, purity, size and size distribution of carbon monoxide-releasing macromolecular assemblies. These case studies revealed that the application possibilities of AUC are by far not completely discovered but can still be extended.

The complement system is an important regulator of both adaptive and innate immunity, implicating complement as a potential target for immunotherapeutics. We have recently presented lymph node-targeting, complement-activating nanoparticles (NPs) as a vaccine platform. Here we explore modulation of surface chemistry as a means to control complement deposition, in active or inactive forms, on polypropylene sulfide core, block copolymer Pluronic corona NPs. We found that nucleophile-containing NP surfaces activated complement and became functionalized in situ with C3 upon serum exposure via the alternative pathway. Carboxylated NPs displayed a higher degree of C3b deposition and retention relative to hydroxylated NPs, upon which deposited C3b was more substantially inactivated to iC3b. This in situ functionalization correlated with in vivo antigen-specific immune responses, including antibody production as well as T cell proliferation and IFN-γ cytokine production upon antigen restimulation. Interestingly, inactivation of C3b to iC3b on the NP surface did not correlate with NP affinity to factor H, a cofactor for protease factor I that degrades C3b into iC3b, indicating that control of complement protein C3 stability depends on architectural details in addition to factor H affinity. These data show that design of NP surface chemistry can be used to control biomaterials-associated complement activation for immunotherapeutic materials.

The use of the biocompatible amphiphilic diblock copolymer poly(ethylene glycol-b-propylene sulfide) (PEG44PPS20) allows a tuned loading of doxorubicin onto the surface of non-functionalized multi-walled carbon nanotubes and an efficient cell internalization. The obtained multi-walled carbon nanotube-based systems show enhanced cytotoxic activity with respect to non-vehicled doxorubicin.

BACKGROUND:Drug and contrast agent delivery systems that achieve controlled release in the presence of enzymatic activity are becoming increasingly important, as enzymatic activity is a hallmark of a wide array of diseases, including cancer and atherosclerosis. Here, we have synthesized clusters of ultrasmall superparamagnetic iron oxides (USPIOs) that sense enzymatic activity for applications in magnetic resonance imaging (MRI). To achieve this goal, we utilize amphiphilic poly(propylene sulfide)-bl-poly(ethylene glycol) (PPS-b-PEG) copolymers, which are known to have excellent properties for smart delivery of drug and siRNA. RESULTS:Monodisperse PPS polymers were synthesized by anionic ring opening polymerization of propylene sulfide, and were sequentially reacted with commercially available heterobifunctional PEG reagents and then ssDNA sequences to fashion biofunctional PPS-bl-PEG copolymers. They were then combined with hydrophobic 12 nm USPIO cores in the thin-film hydration method to produce ssDNA-displaying USPIO micelles. Micelle populations displaying complementary ssDNA sequences were mixed to induce crosslinking of the USPIO micelles. By design, these crosslinking sequences contained an EcoRV cleavage site. Treatment of the clusters with EcoRV results in a loss of R2 negative contrast in the system. Further, the USPIO clusters demonstrate temperature sensitivity as evidenced by their reversible dispersion at ~75°C and re-clustering following return to room temperature. CONCLUSIONS:This work demonstrates proof of concept of an enzymatically-actuatable and thermoresponsive system for dynamic biosensing applications. The platform exhibits controlled release of nanoparticles leading to changes in magnetic relaxation, enabling detection of enzymatic activity. Further, the presented functionalization scheme extends the scope of potential applications for PPS-b-PEG. Combined with previous findings using this polymer platform that demonstrate controlled drug release in oxidative environments, smart theranostic applications combining drug delivery with imaging of platform localization are within reach. The modular design of these USPIO nanoclusters enables future development of platforms for imaging and drug delivery targeted towards proteolytic activity in tumors and in advanced atherosclerotic plaques.

Bioactive hydrogels formed from the Michael-type addition reactions of end-functionalized poly (ethylene glycol) macromers with thiol-containing protease-sensitive peptide crosslinkers have previously been described as matrices for cell-induced enzymatic remodeling. In this study, we sought to develop materials formulations with different degradation profiles by evaluating peptides derived from secreted protein acidic and rich in cysteine (SPARC) as potential substrates for plasmin, matrix metalloproteinase (MMP)-1, and MMP-2. Michaelis-Menten analysis showed that different peptides could provide a range of k(cat) values for each enzyme. In most cases, hydrogels formed with crosslinker peptides that had higher k(cat) values degraded faster when exposed to the appropriate enzyme(s), and fibroblasts showed increased cell proliferation and cell spreading when cultured in the faster degrading hydrogels. Further, greater cell invasion was observed from aortic ring segments embedded in the faster degrading hydrogels. The addition of the SPARC-derived peptides to the repertoire of protease-sensitive crosslinkers increases the potential application of these materials by providing enhanced susceptibility to plasmin. Further, the graded increases in k(cat) and the differential responses for plasmin, MMP-1, and MMP-2 can be used to engineer hydrogels with degradation properties tuned to the enzymes produced by particular cell types, allowing for broader in vivo application.