Faculty Bibliography

We investigated mechanical unfolding of Borrelia burgdorferi outer surface protein A (OspA), a Lyme disease antigen containing a unique single-layer beta-sheet, with atomic force microscopy (AFM). We mechanically stretched a monomeric unit, rather than a tandem repeat, by pulling it from its N and C-terminal residues without using intervening polymer as a spacer. We detected two peaks in the force-extension profile before the final rupture of a fully extended polypeptide, which we interpreted as unfolding of multiple substructures in OspA. The double-peaked unfolding curves are consistent with results of previous thermodynamic studies showing two cooperative units in OspA. The mechanical unfolding processes were reversible, and the two substructures refolded within one second. Mutations near the boundary of the two thermodynamic cooperative units reduced the height of the first unfolding peak to undetectable levels and marginally affected the second one, indicating that the boundary between the two mechanical substructures is related to that previously assigned between the thermodynamic cooperative units. Based on a "worm-like chain" analysis of our AFM data, we propose a model for mechanical unfolding of OspA, where nearly a half of the chain is stretched with minimal resistive force, followed by sequential breakdown of C-terminal and N-terminal substructures. Based on these results, we discuss similarities and differences between mechanical and thermodynamic unfolding reactions of OspA. This work demonstrates that AFM study of monomeric proteins can elucidate details of the intramolecular mechanics of protein substructures.

The estrogen receptor (ER), of which there are two forms, ERalpha and ERbeta, is a ligand-modulated transcription factor important in both normal biology and as a target for agents to prevent and treat breast cancer. Crystallographic studies of the ERalpha ligand-binding domain suggest that Leu-536 may be involved in hydrophobic interactions at the start of a helix, "helix 12," that is crucial in the agonist-stimulated activity of ERalpha, as well as in the ability of antagonists to block the activity of ERalpha. We found that certain mutations of Leu-536 increased the ligand-independent activity of ERalpha although greatly reducing or eliminating the agonist activity of 17beta-estradiol (E2) and 4-hydroxytamoxifen (4OHT), on an estrogen response element-driven and an AP-1-driven reporter. The mutations impaired the interaction of the ER ligand-binding domain with the SRC1 receptor-interacting domain in a mammalian two-hybrid system. When tested in the yeast two-hybrid system, mutation of Leu-536 increased the basal reactivity of ERalpha to probes that recognize the agonist-bound conformation but did not significantly alter its reactivity to these probes in the presence of E2. Most interestingly, mutation of Leu-536 reduced the interaction of the 4OHT-bound ERalpha and increased the reactivity of the raloxifene- or ICI 182,780-bound ERalpha, with probes that recognize the 4OHT-bound ERalpha conformation in a yeast two-hybrid system. These results show that Leu-536 is critical in coupling the binding of ligand to the modulation of the conformation and activity of ERalpha.

Fibronectin is an extracellular matrix protein with broad binding specificity to cell surface receptors, integrins. The tenth fibronectin type III domain (FNfn10) is a small, autonomous domain of fibronectin containing the RGE sequence that is directly involved in integrin binding. However, in isolation FNfn10 only weakly bind to integrins. We reasoned that high-affinity and high-specificity variants of FNfn10 to a particular integrin could be engineered by optimizing residues surrounding the integrin-binding RGD sequence in the flexible FG loop. Affinity maturation of FNfn10 to alphavbeta3 integrin, an integrin up-regulated in angiogenic endothelial cells and in some metastatic tumor cells, yielded alphavbeta3-binding FNfn10 mutants with a novel RGDWXE consensus sequence. We characterized one of the RGDWXE-modified clones, FNfn10-3JCLI4, as purified protein. FNfn10-3JCLI4 binds with high affinity and specificity to purified alphavbeta3 integrin. Alanine scanning mutagenesis suggested that both the tryptophan and glutamic acid residues following the RGD sequence are required for maximal affinity and specificity for alphavbeta3. FNfn10-3JCLI4 specifically stained alphavbeta3-positive cells as detected with flow cytometry and it inhibited alphavbeta3-dependent cell adhesion. As with the anti-alphavbeta3 antibody LM609, FNfn10-3JCLI4 can interfere with in vitro capillary formation. Taken together, these data show that FNfn10-3JCL14 is a specific, high-affinity alphavbeta3-binding protein that can inhibit alphavbeta3-dependent cellular processes similar to an anti-alphavbeta3 monoclonal antibody. These properties, combined with the small, monomeric, cysteine-free and highly stable structure of FNfn10-3JCLI4, may make this protein useful in future applications involving detection and targeting of alphavbeta3-positive cells.

Nuclear spin relaxation experiments performed at 298K, 308K and 318K are used to characterize the intramolecular dynamics and thermodynamics of outer surface protein A (OspA), a key protein in the life-cycle of Borrelia burgdorferi, the causative agent of Lyme disease. It has recently been demonstrated that OspA specifically binds to the gut of the intermediate tick host (Ixodes scapularis), and that this interaction is mediated, at least in part, by residues in the C-terminal domain of OspA that are largely inaccessible to solvent in all X-ray structures of this protein. Our analysis of 15N relaxation parameters in OspA shows that the putative-binding region contains and is surrounded by flexible residues, which could facilitate accessibility to solvent and ligands. In addition, residues with similar activation energies are clustered in a manner that suggests locally collective motions. We have used molecular modeling to show that these collective motions are consistent with a hinge-bending mechanism that exposes residues implicated in binding. Characteristic temperatures describing the energy landscape of the OspA backbone are derived from the temperature dependence of the N-H bond vector order parameters, and a comparison is made between the N and C-terminal globular domains and the unusual single-layer beta-sheet connecting them. The average characteristic temperatures in the three regions indicate that, with an increase in temperature, a larger increase in accessible conformational states occurs for N-H bond vectors in the single-layer central beta-sheet than for bond vectors in the globular N and C-terminal domains. These conformational states are accessible without disruption of hydrogen bonds, providing a conformational entropic gain, upon increase in temperature, without a significant enthalpic penalty. This increase in heat capacity may help to explain the unexpected thermal stability of the unusual single-layer beta-sheet.

The tenth fibronectin type III domain of human fibronectin (FNfn10) is a small, monomeric beta-sandwich protein, similar to the immunoglobulins. We have developed small antibody mimics, 'monobodies', using FNfn10 as a scaffold. We initially altered two loops of FNfn10 that are structurally equivalent to two of the hypervariable loops of the immunoglobulin domain. In order to assess the possibility of utilizing other loops in FNfn10 for target binding, we determined the effects of the elongation of each loop on the conformational stability of FNfn10. We found that all six loops of FNfn10 allowed the introduction of four glycine residues while retaining the global fold. Insertions in the AB and FG loops exhibited very small degrees of destabilization, comparable to or less than predicted entropic penalties due to the elongation, suggesting the absence of stabilizing interactions in these loops in wild-type FNfn10. Insertions in the BC, CD and DE loops, respectively, resulted in modest destabilization. In contrast, the EF loop elongation was highly destabilizing, consistent with previous studies showing the presence of stabilizing interactions in this loop. These results suggest that all loops, except for the EF loop, can be used for engineering a binding site, thus demonstrating excellent properties of the monobody scaffold.

Outer surface protein A (OspA) from Borrelia burgdorferi is a predominantly beta-sheet protein comprised of beta-strands beta1-beta21 and a short C-terminal alpha-helix. It contains two globular domains (N and C-terminal domains) and a unique single-layer beta-sheet (central beta-sheet) that connects the two domains. OspA contains an unusually large number of charged amino acid residues. To understand the mechanism of stabilization of this unique beta-sheet protein, thorough thermodynamic investigations of OspA and its truncated mutant lacking a part of the C-terminal domain were conducted using calorimetry and circular dichroism. The stability of OspA was found to be sensitive to pH and salt concentration. The heat capacity curve clearly consisted of two components, and all the thermodynamic parameters were obtained for each step. The thermodynamic parameters associated with the two transitions are consistent with a previously proposed model, in which the first transition corresponds to the unfolding of the C-terminal domain and the last two beta-strands of the central beta-sheet, and the second transition corresponds to that of the N-terminal domain and the first beta-strand of the central beta-sheet in the second peak. The ratio of calorimetric and van't Hoff enthalpies indicates that the first peak includes another thermodynamic intermediate state. Large heat capacity changes were observed for both transitions, indicative of large changes in the exposure of hydrophobic surfaces associated with the transitions. This observation demonstrates that hydrophobic parts are buried efficiently in the native structure in spite of the low content of hydrophobic residues in OspA. By decomposing the enthalpy, entropy, and Gibbs free energy into contributions from different interactions, we found that the enthalpy changes for hydrogen bonding and polar interactions are exceptionally large, indicating that OspA maintains its stability by making full use of its unique beta-sheet and high content of polar residues. These thermodynamic analyses demonstrated that it is possible to maintain protein tertiary structure by making effective use of an unusual amino acid composition.

We report a native-state hydrogen-exchange (HX) method to simultaneously obtain both thermodynamic and kinetic information on the formation of multiple excited states in a folding energy landscape. Our method exploits the inherent dispersion and pH dependence of the intrinsic HX rates to cover both the EX2 (thermodynamic) and EX1 (kinetic) regimes. At each concentration of denaturant, HX measurements are performed over a range of pH values. Using this strategy, we dissected Borrelia burgdorferi OspA, a predominantly beta-sheet protein containing a unique single-layer beta-sheet, into five cooperative units and postulated excited states predominantly responsible for HX. More importantly, we determined the interconversion rates between these excited states and the native state. The use of both thermodynamic and kinetic information from native-state HX enabled us to construct a folding landscape of this 28kDa protein, including local minima and maxima, and to discriminate on-pathway and off-pathway intermediates. This method, which we term EX2/EX1 HX, should be a powerful tool for characterizing the complex folding mechanisms exhibited by the majority of proteins.

A challenge in understanding the mechanism of protein function in biology is to establish the correlation between functional form in the intracellular environment and high-resolution structures obtained with in vitro techniques. Here we present a strategy to probe conformational changes of proteins inside cells. Our method involves: (i) engineering binding proteins to different conformations of a target protein, and (ii) using them to sense changes in the surface property of the target in cells. We probed ligand-induced conformational changes of the estrogen receptor alpha (ER alpha) ligand-binding domain (LBD). By using yeast two-hybrid techniques, we first performed combinatorial library screening of "monobodies" (small antibody mimics using the scaffold of a fibronectin type III domain) for clones that bind to ER alpha and then characterized their interactions with ER alpha in the nucleus, the native environment of ER alpha, in the presence of various ligands. A library using a highly flexible loop yielded monobodies that specifically recognize a particular ligand complex of ER alpha, and the pattern of monobody specificity was consistent with the structural differences found in known crystal structures of ER alpha-LBD. A more restrained loop library yielded clones that bind both agonist- and antagonist-bound ER alpha. Furthermore, we found that a deletion of the ER alpha F domain that is C-terminally adjacent to the LBD increased the crossreactivity of monobodies to the apo-ER alpha-LBD, suggesting a dynamic nature of the ER alpha-LBD conformation and a role of the F domain in restraining the LBD in an inactive conformation.

We previously demonstrated that a beta-hairpin peptide, termed BH(9-10), derived from a single-layer beta-sheet of Borrelia OspA protein, formed a native-like beta-turn in trifluoroethanol (TFE) solution, and it assembled into amyloid-like fibrils at higher TFE concentrations. This peptide is highly charged, and fibrillization of such a hydrophilic peptide is quite unusual. In this study, we designed a circularly permutated peptide of BH(9-10), termed BH(10-9). When folded into their respective beta-hairpin structures found in OspA, these peptides would have identical cross-strand interactions but different turns connecting the strands. NMR study revealed that BH(10-9) had little propensity to form a turn structure both in aqueous and TFE solutions. At higher TFE concentration, BH(10-9) precipitated with a concomitant alpha-to-beta conformational conversion, in a similar manner to the BH(9-10) fibrillization. However, the BH(10-9) precipitates were nonfibrillar aggregation. The precipitation kinetics of BH(10-9) was exponential, consistent with a first-order molecular assembly reaction, while the fibrillization of BH(9-10) showed sigmoidal kinetics, indicative of a two-step reaction consisting of nucleation and molecular assembly. The correlation between native-like turn formation and fibrillization of our peptide system strongly suggests that BH(9-10) adopts a native-like beta-hairpin conformation in the fibrils. Remarkably, seeding with the preformed BH(10-9) precipitates changed the two-step BH(9-10) fibrillization to a one-step molecular assembly reaction, and disrupted the BH(9-10) fibril structure, indicating interactions between the BH(10-9) aggregates and the BH(9-10) peptide. Our results suggest that, in these peptides, cross-strand interactions are the driving force for molecular assembly, and turn formation limits modes of peptide assembly.

It is generally considered that electrostatic interactions on the protein surface, such as ion pairs, contribute little to protein stability, although they may play important roles in conformational specificity. We found that the tenth fibronectin type III domain of human fibronectin (FNfn10) is more stable at acidic pH than neutral pH, with an apparent midpoint of transition near pH 4. Determination of pK(a)'s for all the side chain carboxyl groups of Asp and Glu residues revealed that Asp 23 and Glu 9 have an upshifted pK(a). These residues and Asp 7 form a negatively charged patch on the surface of FNfn10, with Asp 7 centrally located between Asp 23 and Glu 9, suggesting repulsive electrostatic interactions among these residues at neutral pH. Mutant proteins, D7N and D7K, in which Asp 7 was replaced with Asn and Lys, respectively, exhibited a modest but significant increase in stability at neutral pH, compared to the wild type, and they no longer showed pH dependence of stability. The pK(a)'s of Asp 23 and Glu 9 in these mutant proteins shifted closer to their respective unperturbed values, indicating that the unfavorable electrostatic interactions have been reduced in the mutant proteins. Interestingly, the wild-type and mutant proteins were all stabilized to a similar degree by the addition of 1 M sodium chloride at both neutral and acidic pH, suggesting that the repulsive interactions between the carboxyl groups cannot be effectively shielded by 1 M sodium chloride. These results indicate that repulsive interactions between like charges on the protein surface can destabilize a protein, and protein stability can be significantly improved by relieving these interactions.