Faculty Bibliography

Investigations into the genomic landscape of histone modifications in heterochromatic regions have revealed histone H3 lysine 9 dimethylation (H3K9me2) to be important for differentiation and maintaining cell identity. H3K9me2 is associated with gene silencing and is organized into large repressive domains that exist in close proximity to active genes, indicating the importance of maintenance of proper domain structure. Here we show that nickel, a nonmutagenic environmental carcinogen, disrupted H3K9me2 domains, resulting in the spreading of H3K9me2 into active regions, which was associated with gene silencing. We found weak CCCTC-binding factor (CTCF)-binding sites and reduced CTCF binding at the Ni-disrupted H3K9me2 domain boundaries, suggesting a loss of CTCF-mediated insulation function as a potential reason for domain disruption and spreading. We furthermore show that euchromatin islands, local regions of active chromatin within large H3K9me2 domains, can protect genes from H3K9me2-spreading-associated gene silencing. These results have major implications in understanding H3K9me2 dynamics and the consequences of chromatin domain disruption during pathogenesis.

Variability in the quality of antibodies to histone post-translational modifications (PTMs) is a widely recognized hindrance in epigenetics research. Here, we produced recombinant antibodies to the trimethylated lysine residues of histone H3 with high specificity and affinity and no lot-to-lot variation. These recombinant antibodies performed well in common epigenetics applications, and enabled us to identify positive and negative correlations among histone PTMs.

The grating substrate covered with a metal layer, a plasmonic chip, and a bispecific antibody can play a key role in the sensitive detection of a marker protein with an immunosensor, because of the provision of an enhanced fluorescence signal and the preparation of a sensor surface densely modified with capture antibody, respectively. In this study, one of the tumor markers, a soluble epidermal growth factor receptor (sEGFR), was selected as the target to be detected. The ZnO- and silver-coated plasmonic chip with precise regularity and the appropriate duty ratio in the periodic structure further enhanced the fluorescence intensity. As for sensor surface modification with capture antibody, a bispecific antibody (anti-sEGFR and anti-ZnO antibody), the concentrated bispecific antibody solution was found to nonlinearly form a surface densely immobilized with antibody, because the binding process of a bispecific antibody to the ZnO surface can be a competitive process with adsorption of phosphate. As a result, the interface on the plasmonic chip provided a 300x enhanced fluorescence signal compared with that on a ZnO-coated glass slide, and therefore sEGFR was found to be quantitatively detected in a wide concentration range from 10 nM to 700 fM on our plasmonic surface.

Antibodies directed against histone posttranslational modifications (PTMs) are critical tools in epigenetics research, particularly in the widely used chromatin immunoprecipitation (ChIP) experiments. However, a lack of quantitative methods for characterizing such antibodies has been a major bottleneck in accurate and reproducible analysis of histone modifications. Here, we report a simple and sensitive method for quantitatively characterizing polyclonal and monoclonal antibodies for histone PTMs in a ChIP-like format. Importantly, it determines the apparent dissociation constants for the interactions of an antibody with peptides harboring cognate or off-target PTMs. Analyses of commercial antibodies revealed large ranges of affinity, specificity and binding capacity as well as substantial lot-to-lot variations, suggesting the importance of quantitatively characterizing each antibody intended to be used in ChIP experiments and optimizing experimental conditions accordingly. Furthermore, using this method, we identified additional factors potentially affecting the interpretation of ChIP experiments.

Antibodies, with their high affinity and specificity, are widely utilized in the field of protein engineering, medicinal chemistry, and nanotechnology applications, and our recent studies have demonstrated the recognition and binding of antibody for the surface on inorganic material. In this study, we generated a high-affinity gold-binding antibody fragment by a combination of peptide-grafting and phage-display techniques and showed the availability of the material-binding fragment for one-pot functionalization of nanoparticles as interface molecules. After a gold-binding peptide sequence was grafted into one of the complementarity determining regions of a single variable domain of a heavy-chain camel antibody, a combinatorial library approach raised by 20 times the affinity of the peptide-grafted fragment. The high-affinity gold-binding fragment (E32) spontaneously adsorbed on gold nanoparticles, and consequently the nanoparticles formed a stable dispersion in a high-ionic-strength solution. Multivalent and bispecific antibodies constructed on the E32 platform by means of fusion technology functionalized gold nanoparticles in one pot, and these functionalized nanoparticles could be used to obtain surface plasmon resonance scattering images of cancer cells and to spontaneously link two different nanomaterials. Here, we propose the bispecific antibodies as convenient interface molecules in the nanosized world.

A plasmonic biosensor chip of silver-coated PMMA grating with a zinc oxide (ZnO) overlayer is fabricated for surface plasmon field-enhanced fluorescence (SPF) detection of Cy5-labeled green fluorescent protein (GFP). A bispecific antibody (anti-GFP x anti-ZnO antibody) prepared in our lab is densely immobilized on the sensor chip for GFP detection. The sensitivity of the plasmonic biosensors is improved due to densely packed antibodies and ZnO-coating that suppresses nonspecific protein adsorption and fluorescent quenching. With the ZnO-coated plasmonic chip, Cy5-labeled GFP of 10 pM can be detected through SPF. This sensitivity is 100 higher compared with the normal fluorescent detection on a ZnO-coated glass slide.

Antibodies and their fragments are attractive binding proteins because their high binding strength is generated by several hypervariable loop regions, and because high-quality libraries can be prepared from the vast gene clusters expressed by mammalian lymphocytes. Recent explorations of new genome sequences and protein structures have revealed various small, nonantibody scaffold proteins. Accurate structural descriptions of protein-protein interactions based on X-ray and NMR analyses allow us to generate binding proteins by using grafting and library techniques. Here, we review approaches for generating binding proteins from small scaffold proteins on the basis of tertiary structural information. Identification of binding sites from visualized tertiary structures supports the transfer of function by peptide grafting. The local library approach is advantageous as a go-between technique for grafted foreign peptide sequences and small scaffold proteins. The identification of binding sites also supports the construction of efficient libraries with a low probability of denatured variants, and, in combination with the design for library diversity, opens the way to increasing library density and randomized sequence lengths without decreasing density. Detailed tertiary structural analyses of protein-protein complexes allow accurate description of epitope locations to enable the design of and screening for multispecific, high-affinity proteins recognizing multiple epitopes in target molecules.

Recent advances in molecular evolution technology enabled us to identify peptides and antibodies with affinity for inorganic materials. In the field of nanotechnology, the use of the functional peptides and antibodies should aid the construction of interface molecules designed to spontaneously link different nanomaterials; however, few material-binding antibodies, which have much higher affinity than short peptides, have been identified. Here, we generated high affinity antibodies from material-binding peptides by integrating peptide-grafting and phage-display techniques. A material-binding peptide sequence was first grafted into an appropriate loop of the complementarity determining region (CDR) of a camel-type single variable antibody fragment to create a low affinity material-binding antibody. Application of a combinatorial library approach to another CDR loop in the low affinity antibody then clearly and steadily promoted affinity for a specific material surface. Thermodynamic analysis demonstrated that the enthalpy synergistic effect from grafted and selected CDR loops drastically increased the affinity for material surface, indicating the potential of antibody scaffold for creating high affinity small interface units. We show the availability of the construction of antibodies by integrating graft and evolution technology for various inorganic materials and the potential of high affinity material-binding antibodies in biointerface applications.

Using an artificial peptide library, we have identified a peptide with affinity for ZnO materials that could be used to selectively accumulate ZnO particles on polypropylene-gold plates. In this study, we fused recombinant green fluorescent protein (GFP) with this ZnO-binding peptide (ZnOBP) and then selectively immobilized the fused protein on ZnO particles. We determined an appropriate condition for selective immobilization of recombinant GFP, and the ZnO-binding function of ZnOBP-fused GFP was examined by elongating the ZnOBP tag from a single amino acid to the intact sequence. The fusion of ZnOBP with GFP enabled specific adsorption of GFP on ZnO substrates in an appropriate solution, and thermodynamic studies showed a predominantly enthalpy-dependent electrostatic interaction between ZnOBP and the ZnO surface. The ZnOBP's binding affinity for the ZnO surface increased first in terms of material selectivity and then in terms of high affinity as the GFP-fused peptide was elongated from a single amino acid to intact ZnOBP. We concluded that the enthalpy-dependent interaction between ZnOBP and ZnO was influenced by the presence of not only charged amino acids but also their surrounding residues in the ZnOBP sequence.

Recently, we selected the antibody fragment with high affinity for the biopolymer film of polyhydroxybutyrate (PHB) from human antibody fragment libraries. In this Study. we functionalized CdSe quantum clot (QD) nanoparticles by orderly conjugating the anti-PHB antibody fragments to perform spontaneous and selective stacking of inorganic particles on PHB-coated plates in neutral solutions at room temperature. Surface plasmon resonance analysis showed that the orderly clustering of anti-PHB antibody fragment on QD particles led to no dissociation of QD on PHB-coated plates. indicating the availability of avidity effect. The strong spontaneous immobilization using biomolecular recognition enabled stepwise stacking of inorganic particles oil PHB-coated plates only by mixing operation in neutral Solutions at room temperature. We show the potential of recombinant anti-material antibody fragments for the bottom-up stacking procedures for hybrid assembly.