Faculty Bibliography

OBJECTIVE: To validate a method of measuring angular depth of insertion (aDOI) as well as positional depth of each electrode contact in a cochlear implant by using intraoperative postinsertion skull radiographs. STUDY DESIGN: Retrospective review. SETTING: Tertiary referral center. PATIENTS: Intraoperative postinsertion radiographs obtained from 18 cochlear implant recipients were chosen for analysis. One high-resolution computer tomography scan of the head with the electrode in place was also analyzed. One cadaveric temporal bone with an inserted electrode provided additional data for analysis. INTERVENTION: aDOI and position of each electrode contact were measured from the radiographs using readily available software. High-resolution computer tomography imaging of the cochlea and electrode were reconstructed in three dimensions and used to simulate head rotation during intraoperative radiographs. The cadaveric temporal bone was imaged by x-ray at various acquisition angles. MAIN OUTCOME MEASURES: We evaluated the error introduced in measuring aDOI by assessing intra- and inter-rater variability. We also evaluated the error introduced by x-ray acquisition at nonstandardized angles by analyzing the three-dimensional construct and the cadaveric temporal bone. RESULTS: The concordance correlation coefficients for intrarater (0.991) and inter-rater (0.996) variability in aDOI measurement were excellent. The error introduced by nonstandardized x-ray acquisition angles was only -12.5 degrees to +15.8 degrees even at the limits of clinically relevant head rotation. CONCLUSIONS: The intraoperative postinsertion radiograph is sufficient for estimating positional depth of electrode contacts and the aDOI. This measure is robust in the face of nonstandardized x-ray acquisition angles, and shows good intra- and inter-rater variability.

OBJECTIVES: Commercially available cochlear implant systems attempt to deliver frequency information going down to a few hundred Hertz, but the electrode arrays are not designed to reach the most apical regions of the cochlea, which correspond to these low frequencies. This may cause a mismatch between the frequencies presented by a cochlear implant electrode array and the frequencies represented at the corresponding location in a normal-hearing cochlea. In the following study, the mismatch between the frequency presented at a given cochlear angle and the frequency expected by an acoustic hearing ear at the corresponding angle is examined for the cochlear implant systems that are most commonly used in the United States. DESIGN: The angular insertion of each of the electrodes on four different electrode arrays (MED-EL Standard, MED-EL Flex28, Advanced Bionics HiFocus 1J, and Cochlear Contour Advance) was estimated from X-ray. For the angular location of each electrode on each electrode array, the predicted spiral ganglion frequency was estimated. The predicted spiral ganglion frequency was compared with the center frequency provided by the corresponding electrode using the manufacturer's default frequency-to-electrode allocation. RESULTS: Differences across devices were observed for the place of stimulation for frequencies below 650 Hz. Longer electrode arrays (i.e., the MED-EL Standard and Flex28) demonstrated smaller deviations from the spiral ganglion map than the other electrode arrays. For insertion angles up to approximately 270 degrees , the frequencies presented at a given location were typically approximately an octave below what would be expected by a spiral ganglion frequency map, while the deviations were larger for angles deeper than 270 degrees . For frequencies above 650 Hz, the frequency to angle relationship was consistent across all four electrode models. CONCLUSIONS: A mismatch was observed between the predicted frequency and the default frequency provided by every electrode on all electrode arrays. The mismatch can be reduced by changing the default frequency allocations, inserting electrodes deeper into the cochlea, or allowing cochlear implant users to adapt to the mismatch. Further studies are required to fully assess the clinical significance of the frequency mismatch.

What is the best way to help humans adapt to a distorted sensory input? Interest in this question is more than academic. The answer may help facilitate auditory learning by people who became deaf after learning language and later received a cochlear implant (a neural prosthesis that restores hearing through direct electrical stimulation of the auditory nerve). There is evidence that some cochlear implants (which provide information that is spectrally degraded to begin with) stimulate neurons with higher characteristic frequency than the acoustic frequency of the original stimulus. In other words, the stimulus is shifted in frequency with respect to what the listener expects to hear. This frequency misalignment may have a negative influence on speech perception by CI users. However, a perfect frequency-place alignment may result in the loss of important low frequency speech information. A trade-off may involve a gradual approach: start with correct frequency-place alignment to allow listeners to adapt to the spectrally degraded signal first, and then gradually increase the frequency shift to allow them to adapt to it over time. We used an acoustic model of a cochlear implant to measure adaptation to a frequency-shifted signal, using either the gradual approach or the "standard" approach (sudden imposition of the frequency shift). Listeners in both groups showed substantial auditory learning, as measured by increases in speech perception scores over the course of fifteen one-hour training sessions. However, the learning process was faster for listeners who were exposed to the gradual approach. These results suggest that gradual rather than sudden exposure may facilitate perceptual learning in the face of a spectrally degraded, frequency-shifted input. This article is part of a Special Issue entitled .

Abstract Conclusion: The human frequency-to-place map may be modified by experience, even in adult listeners. However, such plasticity has limitations. Knowledge of the extent and the limitations of human auditory plasticity can help optimize parameter settings in users of auditory prostheses. Objectives: To what extent can adults adapt to sharply different frequency-to-place maps across ears? This question was investigated in two bilateral cochlear implant users who had a full electrode insertion in one ear, a much shallower insertion in the other ear, and standard frequency-to-electrode maps in both ears. Methods: Three methods were used to assess adaptation to the frequency-to-electrode maps in each ear: (1) pitch matching of electrodes in opposite ears, (2) listener-driven selection of the most intelligible frequency-to-electrode map, and (3) speech perception tests. Based on these measurements, one subject was fitted with an alternative frequency-to-electrode map, which sought to compensate for her incomplete adaptation to the standard frequency-to-electrode map. Results: Both listeners showed remarkable ability to adapt, but such adaptation remained incomplete for the ear with the shallower electrode insertion, even after extended experience. The alternative frequency-to-electrode map that was tested resulted in substantial increases in speech perception for one subject in the short insertion ear.

A growing number of minimally invasive surgical and diagnostic procedures require the insertion of an optical, mechanical, or electronic device in narrow spaces inside a human body. In such procedures, precise motion control is essential to avoid damage to the patient's tissues and/or the device itself. A typical example is the insertion of a cochlear implant which should ideally be done with minimum physical contact between the moving device and the cochlear canal walls or the basilar membrane. Because optical monitoring is not possible, alternative techniques for sub millimeter-scale distance control can be very useful for such procedures. The first requirement for distance control is distance sensing. We developed a novel approach to distance sensing based on the principles of scanning electrochemical microscopy (SECM). The SECM signal, i.e., the diffusion current to a microelectrode, is very sensitive to the distance between the probe surface and any electrically insulating object present in its proximity. With several amperometric microprobes fabricated on the surface of an insertable device, one can monitor the distances between different parts of the moving implant and the surrounding tissues. Unlike typical SECM experiments, in which a disk-shaped tip approaches a relatively smooth sample, complex geometries of the mobile device and its surroundings make distance sensing challenging. Additional issues include the possibility of electrode surface contamination in biological fluids and the requirement for a biologically compatible redox mediator.

Neurobiological correlates of adaptation to spectrally degraded speech were investigated with fMRI before and after exposure to a portable real-time speech processor that implements an acoustic simulation model of a cochlear implant (CI). The speech processor, in conjunction with isolating insert earphones and a microphone to capture environment sounds, was worn by participants over a two week chronic exposure period. fMRI and behavioral speech comprehension testing were conducted before and after this two week period. After using the simulator each day for 2h, participants significantly improved in word and sentence recognition scores. fMRI shows that these improvements came accompanied by changes in patterns of neuronal activation. In particular, we found additional recruitment of visual, motor, and working memory areas after the perceptual training period. These findings suggest that the human brain is able to adapt in a short period of time to a degraded auditory signal under a natural learning environment, and gives insight on how a CI might interact with the central nervous system. This paradigm can be furthered to investigate neural correlates of new rehabilitation, training, and signal processing strategies non-invasively in normal hearing listeners to improve CI patient outcomes.

OBJECTIVES:: Perception of spectrally degraded speech is particularly difficult when the signal is also distorted along the frequency axis. This might be particularly important for post-lingually deafened recipients of cochlear implants (CIs), who must adapt to a signal where there may be a mismatch between the frequencies of an input signal and the characteristic frequencies of the neurons stimulated by the CI. However, there is a lack of tools that can be used to identify whether an individual has adapted fully to a mismatch in the frequency-to-place relationship and if so, to find a frequency table that ameliorates any negative effects of an unadapted mismatch. The goal of the proposed investigation is to test the feasibility of whether real-time selection of frequency tables can be used to identify cases in which listeners have not fully adapted to a frequency mismatch. The assumption underlying this approach is that listeners who have not adapted to a frequency mismatch will select a frequency table that minimizes any such mismatches, even at the expense of reducing the information provided by this frequency table. DESIGN:: Thirty-four normal-hearing adults listened to a noise-vocoded acoustic simulation of a CI and adjusted the frequency table in real time until they obtained a frequency table that sounded "most intelligible" to them. The use of an acoustic simulation was essential to this study because it allowed the authors to explicitly control the degree of frequency mismatch present in the simulation. None of the listeners had any previous experience with vocoded speech, in order to test the hypothesis that the real-time selection procedure could be used to identify cases in which a listener has not adapted to a frequency mismatch. After obtaining a self-selected table, the authors measured consonant nucleus consonant word-recognition scores with that self-selected table and two other frequency tables: a "frequency-matched" table that matched the analysis filters with the noisebands of the noise-vocoder simulation, and a "right information" table that is similar to that used in most CI speech processors, but in this simulation results in a frequency shift equivalent to 6.5 mm of cochlear space. RESULTS:: Listeners tended to select a table that was very close to, but shifted slightly lower in frequency from the frequency-matched table. The real-time selection process took on average 2 to 3 min for each trial, and the between-trial variability was comparable with that previously observed with closely related procedures. The word-recognition scores with the self-selected table were clearly higher than with the right-information table and slightly higher than with the frequency-matched table. CONCLUSIONS:: Real-time self-selection of frequency tables may be a viable tool for identifying listeners who have not adapted to a mismatch in the frequency-to-place relationship, and to find a frequency table that is more appropriate for them. Moreover, the small but significant improvements in word-recognition ability observed with the self-selected table suggest that these listeners based their selections on intelligibility rather than some other factor. The within-subject variability in the real-time selection procedure was comparable with that of a genetic algorithm, and the speed of the real-time procedure appeared to be faster than either a genetic algorithm or a simplex procedure.

OBJECTIVES:: The purpose of this study was to determine how the bandwidth of the hearing aid (HA) fitting affects bimodal speech recognition of listeners with a cochlear implant (CI) in one ear and severe-to-profound hearing loss in the unimplanted ear (but with residual hearing sufficient for wideband amplification using National Acoustic Laboratories Revised, Profound [NAL-RP] prescriptive guidelines; unaided thresholds no poorer than 95 dB HL through 2000 Hz). DESIGN:: Recognition of sentence material in quiet and in noise was measured with the CI alone and with CI plus HA as the amplification provided by the HA in the high and mid-frequency regions was systematically reduced from the wideband condition (NAL-RP prescription). Modified bandwidths included upper frequency cutoffs of 2000, 1000, or 500 Hz. RESULTS:: On average, significant bimodal benefit was obtained when the HA provided amplification at all frequencies with aidable residual hearing. Limiting the HA bandwidth to only low-frequency amplification (below 1000 Hz) did not yield significant improvements in performance over listening with the CI alone. CONCLUSIONS:: These data suggest the importance of providing amplification across as wide a frequency region as permitted by audiometric thresholds in the HA used by bimodal users.

Acoustic models have been used in numerous studies over the past thirty years to simulate the percepts elicited by auditory neural prostheses. In these acoustic models, incoming signals are processed the same way as in a cochlear implant speech processor. The percepts that would be caused by electrical stimulation in a real cochlear implant are simulated by modulating the amplitude of either noise bands or sinusoids. Despite their practical usefulness these acoustic models have never been convincingly validated. This study presents a tool to conduct such validation using subjects who have a cochlear implant in one ear and have near perfect hearing in the other ear, allowing for the first time a direct perceptual comparison of the output of acoustic models to the stimulation provided by a cochlear implant.