Faculty Bibliography

BACKGROUND: While the number of female plastic surgeons has continued to increase over time, plastic surgery has historically been a male-dominated profession with only 15% of practicing plastic surgeons being female. Microsurgery, as a subspecialty, has been long perceived as an even more male-centric career path. The objective of this study was to determine the representation of females in the subspecialty field of microsurgery and the impact of microsurgical fellowship training. METHODS: A review of all microsurgery fellowship programs participating in the microsurgery fellowship match from 2010 to 2019 were analyzed. Fellows were identified through fellowship Web site pages or direct contact with fellowship program coordinators and directors. The current type of practice and performance of microsurgery were also identified through a Web search and direct contact with fellowship program coordinators and directors. RESULTS: = 0.29). CONCLUSION/CONCLUSIONS: Women are underrepresented in the field of microsurgery to a similar extent as they are underrepresented in overall plastic surgery. While there is a small insignificant increase in the number of female microsurgery fellows every year, a significantly smaller proportion of females continue to practice microsurgery compared to males.

The present work aims to develop a production method of pre-sintered zirconia-toughened-alumina (ZTA) composite blocks for machining in a computer-aided design and computer-aided manufacturing (CAD-CAM) system. The ZTA composite comprised of 80% Al₂O₃ and 20% ZrO₂ was synthesized, uniaxially and isostatically pressed to generate machinable CAD-CAM blocks. Fourteen green-body blocks were prepared and pre-sintered at 1000 °C. After cooling and holder gluing, a stereolithography (STL) file was designed and uploaded to manufacture disk-shaped specimens projected to comply with ISO 6872:2015. Seventy specimens were produced through machining of the blocks, samples were sintered at 1600 °C and two-sided polished. Half of the samples were subjected to accelerated autoclave hydrothermal aging (20h at 134 °C and 2.2 bar). Immediate and aged samples were characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD). Optical and mechanical properties were assessed by reflectance tests and by biaxial flexural strength test, Vickers indentation and fracture toughness, respectively. Samples produced by machining presented high density and smooth surfaces at SEM evaluation with few microstructural defects. XRD evaluation depicted characteristic peaks of alpha alumina and tetragonal zirconia and autoclave aging had no effect on the crystalline spectra of the composite. Optical and mechanical evaluations demonstrated a high masking ability for the composite and a characteristic strength of 464 MPa and Weibull modulus of 17, with no significant alterations after aging. The milled composite exhibited a hardness of 17.61 GPa and fracture toughness of 5.63 MPa m^1/2, which remained unaltered after aging. The synthesis of ZTA blocks for CAD-CAM was successful and allowed for the milling of disk-shaped specimens using the grinding method of the CAD-CAM system. ZTA composite properties were unaffected by hydrothermal autoclave aging and present a promising alternative for the manufacture of infrastructures of fixed dental prostheses.

STATEMENT OF PROBLEM/BACKGROUND:Maxillofacial prosthodontists were advanced digital technology (ADT) adopters early in the new Millennium. The past two decades saw a range of digital enablers emerge including digital imaging (internal and surface), digital surgical planning, digital functional assessment, subtractive and additive manufacturing, navigation, and robotics among others. Artificial Intelligence (AI) is the latest ADT arrival that will be a challenging disruptive technology. ADT has served as a profound change agent in maxillofacial prosthodontics. The intent was to explore the process and level of ADT engagement in maxillofacial prosthodontics. PURPOSE/OBJECTIVE:The purpose was twofold. Firstly, to explore maxillofacial prosthodontic engagement of ADT. Secondly, to develop a discussion document to assist the American Academy of Maxillofacial Prosthetics (AAMP) with establishing a collective awareness and considered opinion on the future of maxillofacial prosthodontics in the digital era. MATERIAL AND METHODS/METHODS:AAMP member interest in ADT was assessed through analysis of AAMP annual congress programs and publications in the Journal of Prosthetic Dentistry (JPD). The history of the maxillofacial prosthodontic journey to the digital era was undertaken with a selective literature review. The perceptions maxillofacial prosthodontists hold on ADT engagement was assessed through a survey of AAMP members. Developing an understanding of the influence AI was conducted with a review of pertinent literature. RESULTS:From 2011-2020, an annual mean of 38% of papers published in the JPD involved clinical use of ADT. From 2017-2019, 44% of invited presentations at AAMP annual congresses included clinical use of ADT. The journey to the digital era distinguished three periods with formative and consolidation periods influencing the innovation digital era. The AAMP member survey had a 59% response rate and studied 10 domains through 31 questions. Of the respondents, 89% thought ADT important to the future of maxillofacial prosthodontics. CONCLUSIONS:The discussion document will assist the AAMP in developing a collective consciousness and considered opinion on ADT in the future of maxillofacial prosthodontics. Members of the AAMP have a developed interest in clinical applications of ADT. A great challenge is that no formal education, training, or clinical competency requirements for ADT could be identified. Clinical competency requirements are important to prepare maxillofacial prosthodontics for the inevitability of a digital era future. The discussion document poses the fundamental question of whether maxillofacial prosthodontists will remain as passive end users of ADT and AI or will they become engaged knowledge workers that have determined clinical competency in ADT and AI in patient care. Without this knowledge worker role, maxillofacial prosthodontists may experience difficulty being part of the inevitable ADT-AI driven future.

PURPOSE/OBJECTIVE:The pediatric craniofacial trauma literature is limited to single institutions or short study periods. Herein, this study analyzes a national database over 10 years to delineate the epidemiology of pediatric craniofacial fractures and to identify risk factors for acute-level hospital course in the largest series to date. METHODS:Utilizing the National Trauma Data Bank, pediatric craniofacial fractures admitted between 2010 and 2019 were identified. Descriptive analyses and multivariable regression were performed to identify risk factors for acute-level hospital course. RESULTS:A total of 155,136 pediatric craniofacial fracture cases were reviewed, including cranial vault (49.0%), nasal (22.4%), midface (21.0%), mandibular (20.2%), and orbital floor fractures (13.7%). Midface and orbital floor fractures occurred commonly as multicraniofacial fractures. Cranial vault fractures were the most common among all age groups, but frequency declined with age. In contrast, facial fractures increased with age. Despite the inherent complexity of multicraniofacial trauma, isolated fractures remained a concern for acute-level hospital course.Cranial vault and midface fractures had an increased risk of intracranial injury and intensive care unit admission (P<0.001). Mandibular and midface fractures had an increased risk for cervical spine fracture and tracheostomy (P<0.001). Patient and injury-specific risk factors among the fractures with the strongest association for each outcome-cranial vault and mandible-were identified. CONCLUSIONS:The inherent limitations of prior studies-geographical biases, small cohorts, and short-term study periods-were addressed. Describing the independent contribution of each craniofacial fracture to the risk of acute-level hospital course outcomes can be employed to better optimize risk stratification, counseling, and management.

To develop a peri-implantitis model in a Gottingen minipig and evaluate the effect of local application of salicylic acid poly(anhydride-ester) (SAPAE) on peri-implantitis progression in healthy, metabolic syndrome (MS), and type-2 diabetes mellitus (T2DM) subjects. Eighteen animals were allocated to three groups: (i) control, (ii) MS (diet for obesity induction), and (iii) T2DM (diet plus streptozotocin for T2DM induction). Maxillary and mandible premolars and first molar were extracted. After 3 months of healing, four implants per side were placed in both jaws of each animal. After 2 months, peri-implantitis was induced by plaque formation using silk ligatures. SAPAE polymer was mixed with mineral oil (3.75 mg/μL) and topically applied biweekly for up to 60 days to halt peri-implantitis progression. Periodontal probing was used to assess pocket depth over time, followed by histomorphologic analysis of harvested samples. The adopted protocol resulted in the onset of peri-implantitis, with healthy minipigs taking twice as long to reach the same level of probing depth relative to MS and T2DM subjects (∼3.0 mm), irrespective of jaw. In a qualitative analysis, SAPAE therapy revealed decreased levels of inflammation in the normoglycemic, MS, and T2DM groups. SAPAE application around implants significantly reduced the progression of peri-implantitis after ∼15 days of therapy, with ∼30% lower probing depth for all systemic conditions and similar rates of probing depth increase per week between the control and SAPAE groups. MS and T2DM conditions presented a faster progression of the peri-implant pocket depth. SAPAE treatment reduced peri-implantitis progression in healthy, MS, and T2DM groups.

OBJECTIVE:To evaluate the safety of same-day discharge for patients undergoing primary cleft palate repair. DESIGN/METHODS:Single-surgeon retrospective review. SETTING/METHODS:Tertiary care institution. PATIENTS/PARTICIPANTS/METHODS:40 consecutive patients that underwent primary cleft palate repair by a single surgeon from September 2018 to June 2023. INTERVENTIONS/METHODS:Same-day discharge versus overnight admission after primary palatoplasty. MAIN OUTCOME MEASURES/METHODS:30-day readmission, reoperation, wound and all-cause complication rate and 1-year fistula incidence. RESULTS: < .001). CONCLUSIONS:In a low-risk patient population, same-day discharge following primary cleft palate repair may be safely undertaken and result in similar short-term outcomes and 1-year fistula incidence as patients admitted for overnight stay.

PURPOSE/OBJECTIVE:Gingivoperiosteoplasty (GPP) can avoid secondary alveolar bone graft in up to 60% of patients. The effects of GPP on maxillary growth are a concern. However, palatoplasty can also negatively impact facial growth. This study quantifies the isolated effects of GPP and cleft palate repair on maxillary growth at the age of mixed dentition. METHODS:A single institution, retrospective study of all patients undergoing primary reconstruction for unilateral cleft lip and alveolus (CLA) or cleft lip and palate (CLP) was performed. Study patients had lateral cephalograms at age of mixed dentition. Patients were stratified into four groups: CLA with GPP (CLA+GPP), CLA without GPP (CLA-GPP), CLP with GPP (CLP+GPP), and CLP without GPP (CLP-GPP). Cephalometric measurements included: sella-nasion-point A (SNA), sella-nasion-point B (SNB), and A point-nasion-B point (ANB). Landmarks were compared between patient groups and to Eurocleft Center D data. RESULTS:110 patients met inclusion criteria: 7 CLA-GPP, 16 CLA+GPP, 24 CLP-GPP, and 63 CLP+GPP patients. There were no significant differences in SNA, SNB, and ANB between CLA+GPP and CLA-GPP, or between CLP+GPP and CLP-GPP groups. In patients who did not receive GPP, SNA was significantly lower in patients with a cleft palate compared to patients with an intact palate (p < 0.05). There were no significant differences in SNA or SNB of CLP-GPP or CLP+GPP groups when compared to Eurocleft data. CONCLUSION/CONCLUSIONS:When controlling for the effects of cleft palate repair, GPP does not appear to negatively affect midface growth at the age of mixed dentition.

BACKGROUND:Hierarchical micro-nano structured topography along with surface chemistry modifications of dental implants have been suggested to positively contribute to the osseointegration process. However, the effect of such surface modifications on the molecular response as well as bone formation rate and quality are still unclear, especially in the early healing period. This study aimed to evaluate the effect of coating a double acid etched (DAE) implant surface with nano-sized (20 nm) hydroxyapatite (Nano) with respect to gene expression, histologic parameters, and nanomechanical properties when compared to DAE control at 1 and 2 weeks after implant placement in a rodent femur model. MATERIAL AND METHODS/METHODS:Expression of bone-related genes was determined by qRT-PCR (Col-I, Runx-2, Osx, Opn, Ocn, Alp). Histomorphometric evaluation of bone-to-implant contact (BIC) and bone area fraction occupancy (BAFO) within implant threads was performed using photomicrographs after histologic processing. Mechanical properties, reduced elastic modulus and hardness, were determined through nanoindentation. RESULTS:At 1 week, the Nano group demonstrated significantly higher expression of Col-I and Ocn compared to the DAE group, indicating upregulation of osteoprogenitor and osteoblast differentiation genes. At 2 weeks, Nano surface further exhibited enhanced gene expression of Col-I and Osx in comparison to the DAE surface, suggesting an increased mineralization of the newly formed bone. Nanoindentation analysis revealed that the Nano group presented no significant difference on the ranks of reduced elastic modulus and hardness compared to DAE for both timepoints. Histomorphometric analysis yielded no significant difference in the percentage of BIC and BAFO between the Nano and DAE surfaces at 1 and 2 weeks. However, Nano implants did present a higher mean value, ~50%, of BIC compared to DAE, ~30%, after 2 weeks in vivo. CONCLUSIONS:While no significant differences were observed in the amount and mechanical properties of newly formed bone, Nano surface positively and significantly increased the expression osteogenic genes compared to DAE surface at early healing periods.