Searched for: school:SOM
Department/Unit:Plastic Surgery
Remodeling of the Temporomandibular Joint After Mandibular Setback Surgery: A 3D Cephalometric Analysis
Naik, Keyur Y; Lee, Kevin C; Rekawek, Peter; Zoida, Joseph; Torroni, Andrea
BACKGROUND:Condylar adaptations following orthognathic surgery remain an area of interest. Prior studies do not use 3-dimensional imaging modalities and lack standardization in the choice of osteotomy and movement when assessing condylar changes. PURPOSE:The purpose of this study was to use 3-dimensional cephalometry to measure the association between osteotomy type (sagittal split osteotomy [SSO] vs vertical ramus osteotomy [VRO]) and changes in condylar volume and position. STUDY DESIGN, SETTING, AND SAMPLE:This is a retrospective cohort study from January 2021 through December 2022 of patients at Bellevue Hospital in New York City, New York who were treated with either SSO or VRO for the correction of Class III skeletal malocclusion. PREDICTOR/EXPOSURE/INDEPENDENT VARIABLE:The primary predictor was the type of mandibular osteotomy, sagittal split osteotomy, and vertical ramus osteotomy. MAIN OUTCOME VARIABLES:) and relative position (anterior-posterior change utilizing the Pullinger and Hollinder method). COVARIATES:Covariates included patient age, sex, setback magnitude, temporomandibular joint symptoms, and fixation method for SSO patients. ANALYSES:tests. If there were multiple significant univariate predictors, multiple regression models were created to predict volume and position changes. A P < .05 value was considered statistically significant. RESULTS:; P = .03) and positional change (68.2 vs 12.5%; P < .01). Self-reported measures of postoperative pain, internal derangement, and myofascial symptoms were not significantly associated with either volume or positional changes. CONCLUSIONS AND RELEVANCE:The SSO resulted in greater postoperative condylar volume loss and positional changes. These volume and positional changes were not correlated with self-reported temporomandibular disorder symptoms.
PMID: 37640238
ISSN: 1531-5053
CID: 5613862
LeFort I Horizontal Osteotomy: Defining the Feasibility of the "High Osteotomy"
Verzella, Alexandra N; Alcon, Andre; Schechter, Jill; Shetye, Pradip R; Staffenberg, David A; Flores, Roberto L
OBJECTIVE:To define "high osteotomy" and determine the feasibility of performing this procedure. DESIGN/METHODS:Single institution, retrospective review. SETTING/METHODS:Academic tertiary referral hospital. PATIENTS, PARTICIPANTS/METHODS:34 skeletally mature, nonsyndromic patients with unilateral CLP who underwent Le Fort I osteotomy between 2013 and 2020. Patients with cone-beam computed tomography (CBCT) scans completed both pre- (T1) and post-operatively (T2) were included. Patients with bilateral clefts and rhinoplasty prior to post-operative imaging were excluded. INTERVENTIONS/METHODS:Single jaw one-piece Le Fort I advancement surgery. MAIN OUTCOME MEASURES/METHODS:Measurements of the superior ala and inferior turbinates were taken from the post-operative CBCT. RESULTS:The sample included 26 males and 8 females, 12 right- and 22 left-sided clefts. The inferior turbinates are above the superior alar crease at a rate of 73.53% and 76.48% on the cleft and non-cleft sides, respectively. One (2.9%) osteotomy cut was above the level of the cleft superior alar crease, and no cuts were above the level of the non-cleft superior ala. On average, the superior ala was 2.63 mm below the inferior turbinates. The average vertical distances from the superior alar crease and the inferior turbinates to the base of the non-cleft side pyriform aperture were 12.17 mm (95% CI 4.00-20.34) and 14.80 mm (95% CI 4.61-24.98), respectively. To complete a "high osteotomy," with 95% confidence, the cut should be 20.36 mm from the base of the pyriform aperture. CONCLUSIONS:A "high" osteotomy is not consistently possible due to the relationship between the superior alar crease and the inferior turbinate.
PMID: 37885216
ISSN: 1545-1569
CID: 5614352
Commentary on: The Skin Necrosis Conundrum: Examining Long-term Outcomes and Risk Factors in Implant-Based Breast Reconstruction [Comment]
Karp, Nolan S
PMID: 37606306
ISSN: 1527-330x
CID: 5598302
Non-Thermal Plasma Treatment of Poly(tetrafluoroethylene) Dental Membranes and Its Effects on Cellular Adhesion
Nayak, Vasudev Vivekanand; Mirsky, Nicholas Alexander; Slavin, Blaire V; Witek, Lukasz; Coelho, Paulo G; Tovar, Nick
Non-resorbable dental barrier membranes entail the risk of dehiscence due to their smooth and functionally inert surfaces. Non-thermal plasma (NTP) treatment has been shown to increase the hydrophilicity of a biomaterials and could thereby enhance cellular adhesion. This study aimed to elucidate the role of allyl alcohol NTP treatment of poly(tetrafluoroethylene) in its cellular adhesion. The materials (non-treated PTFE membranes (NTMem) and NTP-treated PTFE membranes (PTMem)) were subjected to characterization using scanning electron microscopy (SEM), contact angle measurements, X-ray photoelectron spectroscopy (XPS), and electron spectroscopy for chemical analysis (ESCA). Cells were seeded upon the different membranes, and cellular adhesion was analyzed qualitatively and quantitatively using fluorescence labeling and a hemocytometer, respectively. PTMem exhibited higher surface energies and the incorporation of reactive functional groups. NTP altered the surface topography and chemistry of PTFE membranes, as seen through SEM, XPS and ESCA, with partial defluorination and polymer chain breakage. Fluorescence labeling indicated significantly higher cell populations on PTMem relative to its untreated counterparts (NTMem). The results of this study support the potential applicability of allyl alcohol NTP treatment for polymeric biomaterials such as PTFE-to increase cellular adhesion for use as dental barrier membranes.
PMCID:10608478
PMID: 37895615
ISSN: 1996-1944
CID: 5606802
Analysis of Incidentally Found Proliferative Lesions in Oncoplastic and Macromastia Breast Reductions
Morrison, Kerry A; Choi, Mihye; Karp, Nolan S
BACKGROUND:Reduction mammaplasty pathologic specimens can reveal incidentally found proliferative lesions. However, there is a lack of data investigating the comparative incidences and risk factors for such lesions. METHODS:A retrospective review was conducted of all consecutively performed reduction mammaplasty cases at a single large academic medical institution in a metropolitan city by two plastic surgeons over a 2-year period. All reduction mammaplasties, symmetrizing reductions, and oncoplastic reductions performed were included. There were no exclusion criteria. RESULTS:A total of 632 breasts were analyzed-502 reduction mammaplasties, 85 symmetrizing reductions, and 45 oncoplastic reductions-in 342 patients. Mean age was 43.9 ± 15.9 years, mean body mass index was 29.2 ± 5.7 kg/m 2 , and mean reduction weight was 610.0 ± 313.1 g. Patients who underwent reduction mammaplasty for benign macromastia had a significantly lower incidence (3.6%) of incidentally found breast cancers and proliferative lesions compared with patients with oncoplastic reductions (13.3%) and symmetrizing reductions (17.6%) ( P < 0.001). On univariate analysis, personal history of breast cancer ( P < 0.001), first-degree family history of breast cancer ( P = 0.008), age ( P < 0.001), and tobacco use ( P = 0.033) were all statistically significant risk factors. Using a backward elimination stepwise reduced multivariable logistic regression model for risk factors associated with breast cancer or proliferative lesions, age ( P < 0.001) was the only retained significant risk factor. CONCLUSIONS:Proliferative lesions and carcinomas of the breast found in reduction mammaplasty pathologic specimens may be more common than previously reported. The incidence of newly found proliferative lesions was significantly lower in cases of benign macromastia compared with oncoplastic and symmetrizing reductions. CLINICAL QUESTION/LEVEL OF EVIDENCE:Risk, II.
PMID: 36862961
ISSN: 1529-4242
CID: 5725032
Topical Nitroglycerin Ointment Reduces Mastectomy Flap Necrosis in Immediate Autologous Breast Reconstruction
Yao, Amy; Greige, Nicolas; Ricci, Joseph A; Draper, Lawrence B; Weichman, Katie E
BACKGROUND:Mastectomy flap necrosis (MFN) is a common complication of immediate breast reconstruction that greatly affects patient satisfaction and cosmetic outcomes. Topical nitroglycerin ointment, with its low cost and negligible side effects, has been shown to significantly decrease the incidence of MFN in immediate implant-based breast reconstruction, but its utility has not been studied in immediate autologous reconstruction. METHODS:With institutional review board approval, a prospective cohort study was performed of all consecutive patients undergoing immediate free-flap breast reconstruction by a single reconstructive surgeon at a single institution between February of 2017 and September of 2021. Patients were divided into two cohorts: those who received 30 mg of topical nitroglycerin ointment to each breast at the conclusion of the operation (September of 2019 to September of 2021) and those who did not (February of 2017 to August of 2019). All patients underwent intraoperative SPY angiography, and mastectomy skin flaps were débrided intraoperatively based on imaging. Independent demographic variables were analyzed, and dependent outcome variables included mastectomy skin flap necrosis, headache, and hypotension requiring removal of ointment. RESULTS:A total of 35 patients (49 breasts) were included in the nitroglycerin cohort and 34 patients (49 breasts) were included in the control group. There was no significant difference in patient demographics, medical comorbidities, or mastectomy weight between cohorts. The rate of MFN decreased from 51% in the control group to 26.5% in the group that received nitroglycerin ointment ( P = 0.013). There were no documented adverse events associated with nitroglycerin use. CONCLUSION:Topical nitroglycerin ointment significantly decreases the rate of MFN in patients undergoing immediate autologous breast reconstruction without significant adverse effects. CLINICAL QUESTION/LEVEL OF EVIDENCE:Therapeutic, II.
PMID: 36862948
ISSN: 1529-4242
CID: 5725022
Bone Tissue Engineering (BTE) of the Craniofacial Skeleton, Part I: Evolution and Optimization of 3D-Printed Scaffolds for Repair of Defects
Nayak, Vasudev V; Slavin, Blaire; Bergamo, Edmara T P; Boczar, Daniel; Slavin, Benjamin R; Runyan, Christopher M; Tovar, Nick; Witek, Lukasz; Coelho, Paulo G
Bone tissue regeneration is a complex process that proceeds along the well-established wound healing pathway of hemostasis, inflammation, proliferation, and remodeling. Recently, tissue engineering efforts have focused on the application of biological and technological principles for the development of soft and hard tissue substitutes. Aim is directed towards boosting pathways of the healing process to restore form and function of tissue deficits. Continued development of synthetic scaffolds, cell therapies, and signaling biomolecules seeks to minimize the need for autografting. Despite being the current gold standard treatment, it is limited by donor sites' size and shape, as well as donor site morbidity. Since the advent of computer-aided design/computer-aided manufacturing (CAD/CAM) and additive manufacturing (AM) techniques (3D printing), bioengineering has expanded markedly while continuing to present innovative approaches to oral and craniofacial skeletal reconstruction. Prime examples include customizable, high-strength, load bearing, bioactive ceramic scaffolds. Porous macro- and micro-architecture along with the surface topography of 3D printed scaffolds favors osteoconduction and vascular in-growth, as well as the incorporation of stem and/or other osteoprogenitor cells and growth factors. This includes platelet concentrates (PCs), bone morphogenetic proteins (BMPs), and some pharmacological agents, such as dipyridamole (DIPY), an adenosine A 2A receptor indirect agonist that enhances osteogenic and osteoinductive capacity, thus improving bone formation. This two-part review commences by presenting current biological and engineering principles of bone regeneration utilized to produce 3D-printed ceramic scaffolds with the goal to create a viable alternative to autografts for craniofacial skeleton reconstruction. Part II comprehensively examines recent preclinical data to elucidate the potential clinical translation of such 3D-printed ceramic scaffolds.
PMCID:10592373
PMID: 37639650
ISSN: 1536-3732
CID: 5605102
Gender Surgery in Adolescents and Young Adults: A Review of Ethical and Surgical Considerations
Robinson, Isabel S; Carswell, Jeremi M; Boskey, Elizabeth; Agarwal, Cori A; Brassard, Pierre; Bélanger, Maud; Zhao, Lee C; Bluebond-Langner, Rachel
BACKGROUND:The incidence of transgender adolescents seeking gender affirming surgery (GAS) in increasing. Surgical care of the adolescent transgender patient is associated with several unique technical, legal, and ethical factors. The authors present a review of the current literature on gender affirming surgery for individuals under the age of legal majority and propose directions for future research. METHODS:A scoping review of recent literature was performed to assess evidence on gender affirming surgery in individuals under the age of legal majority. Papers were included that examined either ethical or technical factors unique to pediatric GAS. Study characteristics and conclusions were analyzed in conjunction with expert opinion. RESULTS:Twelve papers were identified meeting inclusion criteria. Ten of these papers discussed ethical challenges in adolescent GAS, seven papers discussed legal challenges, and five papers discussed technical challenges. Ethical discussions focused on the principles of beneficence, nonmaleficence, and autonomy. Legal discussions centered on informed consent and insurance coverage. Technical discussions focused on the impact of puberty blockade on natal tissue. CONCLUSIONS:Surgical care of the adolescent transgender patient involves important ethical, legal, and technical considerations that must be addressed by the clinical team. As the population of individuals seeking GAS after puberty blockade increases, future research is needed describing functional and psychosocial outcomes in these individuals.
PMID: 36827481
ISSN: 1529-4242
CID: 5434082
Double-Barrel Vascularized Free Fibula Flap for Reconstruction of Sternal Nonunion with Bone Defect: A Case Report [Case Report]
Perez-Otero, SofÃa; Bekisz, Jonathan M; Sánchez-Navarro, Gerardo; Chang, Stephanie H; Levine, Jamie P
CASE/METHODS:Given the rare incidence of sternal nonunion after traumatic injury, literature describing the management of posttraumatic sternal reconstruction is limited. We present a case of a 54-year-old man with a history of traumatic chest wall injury with multiple unsuccessful attempts at sternal repair who presented with chronic sternal nonunion and persistent bone defect. Sternal reconstruction using a vascularized double-barrel free fibula flap with rigid fixation in multiple planes was performed, with confirmed bony union at 6 months. CONCLUSION/CONCLUSIONS:This novel approach to sternal nonunion management allowed effective bridging of posttraumatic sternal bone defects while facilitating osseous integration and long-term stabilization.
PMID: 38134292
ISSN: 2160-3251
CID: 5611872
Reducing Complications in Pilon Fracture Surgery: Surgical Time Matters
Shafiq, Babar; Zhang, Bo; Zhu, Diana; Gupta, Deven K; Cubberly, Mark; Stepanyan, Hayk; Rezzadeh, Kevin; Lim, Philip K; Hacquebord, Jacques; Gupta, Ranjan
OBJECTIVE:To correlate patient and surgeon specific factors with outcomes after operative management of distal intra-articular tibia fractures. DESIGN/METHODS:Retrospective cohort study. SETTING/METHODS:Three Level 1 tertiary academic trauma centers. PATIENTS/PARTICIPANTS/METHODS:A consecutive series of 175 patients with OTA/AO 43-C pilon fractures. MAIN OUTCOME MEASUREMENTS/METHODS:Primary outcomes include superficial and deep infection. Secondary outcomes include nonunion, loss of articular reduction, and implant removal. RESULTS:The following patient specific factors correlated with poor surgical outcomes: increased age with superficial infection rate (p<0.05), smoking with rate of nonunion (p<0.05), and Charlson Comorbidity Index with loss of articular reduction(p<0.05). Each additional 10 minutes of operative time over 120 minutes was associated with increased odds of requiring I&D and any treatment for infection. The same linear effect was seen with addition of each fibular plate. The number of approaches, type of approach, use of bone graft, and staging were not associated with infection outcomes. Each additional 10 minutes of operative time over 120 minutes was associated with increased rate of implant removal, as did fibular plating. CONCLUSIONS:While many of the patient-specific factors that negatively impact surgical outcomes for pilon fractures may not be modifiable, surgeon-specific factors need to be carefully examined as these may be addressed. Pilon fracture fixation has evolved to increasingly utilize fragment specific approaches applied with a staged approach. Although the number and type of approaches did not affect outcomes, longer operative time was associated with increased odds of infection while additional fibular plate fixation, was associated with higher odds of both infection and implant removal. Potential benefits of additional fixation should be weighed against operative time and associated risk of complications. LEVEL OF EVIDENCE/METHODS:Prognostic Level III. See Instructions for Authors for a complete description of levels of evidence.
PMID: 37226911
ISSN: 1531-2291
CID: 5508472