Faculty Bibliography

Volume-based and surface-based algorithms for three-dimensional rendering of computed tomography (CT) scans of the human skull were compared in patients with craniofacial anomalies. Both methods were applied to a selected sample of 12 clinical CT studies. The number of sections ranged from 24 to 72 and the section thickness from 1.5 to 6.0 mm. Volume renderings were more prone to interpolation artifacts but captured the anatomy in greater detail. The sites of closed cranial sutures, visualized using the volume technique, were not demonstrated using the specific surface rendering technique used in this study. In both techniques the areas of thin bone appeared as gaps

When treating an infant or younger child with severe craniofacial synostosis, the burden is placed on the surgeon in making a decision regarding not only the design of the osteomy but also the timing of the surgical intervention. This article reviews the current treatment protocols for craniofacial anomalies

The loss of a fingernail is remarkably disturbing to many patients. Despite all efforts, surgical methods of replacement have not proven to be very satisfactory. Like artificial eyes, techniques for making an artificial fingernail of good likeness have been available for many years. The problem has been a satisfactory method of attaching the artificial fingernail to the digit and eventually that of making the artificial nail sufficiently thin. While no perfect solution exists, the development of a 'submini' digital prosthesis that covers only the distal phalanx offers the best available solution. Only if the prosthesis is custom developed and fabricated to the very highest standards will the potential be realized. Repair will be required occasionally, so assured availability of prompt and reliable maintenance services is most important. When there has been loss of tissues from the distal phalanx, the prosthesis can also help with that problem. Finally, the prosthesis has the advantage of inflicting no scars or other irreversible measures

The incidence of anastomotic leakage in colonic surgery is approximately 10%. We evaluated a technique of laser-fibrinogen reinforcement to strengthen experimental colonic anastomoses. The technique consisted of the topical application of indocyanine green dye-enhanced fibrinogen to the serosal surface of two-layer inverting anastomoses, followed by exposure with an 808-nm diode laser. In the 28 rabbits used for this study, mean bursting pressure at time 0 was 108 +/- 13 mm Hg in the group receiving anastomoses with sutures alone and 173 +/- 20 mm Hg in the group for which the sutured anastomosis was reinforced with laser-fibrinogen. The difference in bursting pressures between the two groups was statistically significant at time 0. However, at 1, 3, 5, and 7 days, the anastomosis became stronger in both groups and the difference in strength was reduced; the sutured group had more exceptionally weak (less than 110 mm Hg) bonds than the group treated by laser. Thus, laser-fibrinogen reinforcement significantly enhances the early strength of sutured colonic anastomoses. This technique may reduce the incidence of leakage during the first postoperative week and the associated complications in a clinical setting

Anastomoses welded by laser have been strengthened by applying a solder of fibrinogen combined with a laser energy absorbing dye (indocyanine green, maximum absorbance 805 nm) to the anastomotic site before continuous-wave diode laser exposure (808 +/- 1 nm, 4.8 W/cm2). Immediately after creation, the bursting pressures of welds created without fibrinogen (262 +/- 29 mm Hg, n = 11) were significantly less than repairs with fibrinogen (330 +/- 75 mm Hg, n = 11) (p less than 0.05). When repairs performed with fibrinogen were exposed to urokinase (25,000 IU) the bursting pressures were not significantly different from baseline (290 +/- 74 mm Hg, n = 5). Aortotomies closed by suture did not burst but leaked at pressures significantly below those of vessels closed by laser (165 +/- 9 mm Hg, n = 11) (p less than 0.01). Twenty-two repairs soldered with fibrinogen were incorporated into survival studies in rabbits and examined from 1 to 90 days after operation. No anastomotic ruptures, thromboses, or aneurysms were identified. Soldered sites rapidly regenerated a new intimal surface and healed by myofibroblast proliferation. No significant foreign body response was identified; the fibrinogen was resorbed. Laser soldering with exogenous fibrinogen is feasible without topical administration of additional clotting agents, significantly improves the bursting strength of primary laser welded anastomoses, and appears to result from urokinase-resistant fibrinogen cross-linking

We hypothesized that autologous clot deposited on the luminal surface of laser vascular welds immediately after creation would produce higher time zero bursting pressures that could be achieved in welds perfused with saline alone. To test this hypothesis, we compared bursting pressures of welds created in isolated rabbit aortic segments 1) with saline perfusion only, 2) with blood perfusion, and 3) with blood perfusion followed by infusion of urokinase. Tissue welds with saline perfusion had a mean bursting pressure of 159 +/- 45 mm Hg; tissue welds following blood perfusion had a mean pressure of 262 +/- 29 mm Hg; tissue welds with blood perfusion followed by urokinase infusion had a mean bursting pressure of 187 +/- 35 mm Hg. The saline and urokinase groups were not significantly different. However, the blood-perfused group was significantly higher than both the saline group and the urokinase group. Thus, the addition of urokinase eliminates the beneficial effects noted after blood reperfusion. These observations suggest that the enhancement of weld strength following exposure to blood is due predominantly to the adherence of fibrin-platelet aggregates at the site of the weld

Leakage from colonic anastomoses is a common cause of morbidity in patients recovering from bowel surgery. We evaluated a technique of laser-fibrinogen reinforcement to strengthen colonic anastomoses in a canine model. After creation of eight single-layer interrupted suture anastomoses in six dogs, indocyanine green-dye-enhanced fibrinogen was topically applied to the serosal surface and exposed to 808 nm diode laser energy. Immediately following colonic anastomosis, the mean leakage pressure was 137 +/- 22 mm Hg in the group (n = 8) using sutures alone and 326 +/- 67 mm Hg (P less than 0.001) in the group (n = 8) after the sutured anastomosis was reinforced with lasered-fibrinogen. On histological examination, no evidence of thermal injury to the tissue edges was noted and a layer of fibrinogen bridged the anastomotic gap. Laser dye-enhanced fibrinogen reinforcement significantly enhances the strength of sutured colonic anastomoses without causing appreciable thermal injury to the host tissues