Faculty Bibliography

Movement disorder emergencies of the aerodigestive tract are dramatic and often life threatening. With appropriate timely evaluation and intervention, most patients can be effectively managed and major morbidity avoided. This chapter provides a comprehensive review of both the causes and appropriate treatment of breathing disturbances secondary to primary disorders and iatrogenic causes, as well as swallowing emergencies. Additionally, basic physiology, anatomy, and various methods for assessment of the upper aerodigestive tract are reviewed. Specific disorders that are addressed include the following: spasmodic dysphonia, adductor laryngeal breathing dystonia, Shy-Drager abductor weakness, drug-induced tardive dystonia, oromandibulolingual dystonia, multiple system atrophy, multiple sclerosis, amyotrophic lateral sclerosis, Parkinson's disease, Huntington's disease, and palatal myoclonus.
Copyright

Background/Purpose: Primary cheiloplasty for infants born with cleft lip and palate has long been preceded and facilitated by oral appliances intended to aid in feeding, narrow the cleft width, or mold the surrounding cartilages. Presurgical infant orthopedic (PSIO) therapy has evolved in both its popularity and focus of treatment since its advent. Nasoalveolar molding (NAM), nasal elevators, the Latham appliance, lip taping, and passive plates are the modern treatment options offered by cleft teams, and each varies in their associated protocols and treatment philosophies. The purpose of this study is to examine trends in the currently available modalities of PSIO care and PSNS for the management of patients with cleft lip and palate. Methods/Description: Methods: An electronic survey comprised of eight questions was distributed to the one hundred and sixty-seven cleft team coordinators listed by the American Cleft Palate Association. The survey reported on team setting, provider availability, PSIO treatment offerings, relative contraindications, and use of postsurgical nasal stenting. Descriptive statistics and analyses were performed using MS Excel (Microsoft, Redmond, WA) and SPSS (IBM, Chicago, IL).
Result(s): One hundred and two survey responses were received from the total one hundred, and sixty-seven sent, resulting in a response rate of 61%. The majority of settings were children's specialty hospitals (66%) or university hospitals (27%). PSIO was offered by 86% of cleft teams, and the majority of those (68%) provided NAM. Nasal elevators and lip taping are offered at 44% and 53% of centers, respectively. Latham and passive plates are both offered at 5.5% of centers. Teams with a dental specialist as the PSIO provider offered NAM significantly more than centers with surgeons as the provider of PSIO. Most centers (45%) had an orthodontist providing treatment. Patients are considered contraindicated for treatment at many centers for reasons such as mild cleft severity (46%), medically-compromised (42%), advanced age at first visit (29%), far commute (35%), and/or financial reasons (16%). The majority of centers use postsurgical nasal stenting (86%), and almost all insert the device immediately in the operating room (88%).
Conclusion(s): NAM is the most popular PSIO technique in North American cleft centers followed by the nasal elevator, suggesting that the nasal molding component of PSIO of critical influence on current treatment practices. With 86% of centers providing PSIO, access to care is improving with an increasing variety of treatment modalities. Postsurgical nasal stenting is also gaining popularity. The use of various PSIO techniques is ubiquitous, but the emphasis on nasal molding may continue to be the driving force for treatment in the future

Background/Purpose: The relative value unit (RVU) is a metric established by Medicare to quantify physician time and intensity required to furnish a surgical service, and is broadly used for the purposes of billing and physician compensation. Despite widespread use since the 1990s, the accuracy of RVU assignments has not been scientifically evaluated for cleft and craniofacial surgery. We hypothesize that unbalanced RVU allocation creates inappropriate disparities in value amongst procedures performed by cleft and craniofacial surgeons. Methods/Description: The American College of Surgeons Pediatric National Surgical Quality Improvement Program (NSQIP) database was queried to identify all cleft and craniofacial surgery cases performed by plastic surgeons from 2012-2019 based on Current Procedural Terminology (CPT) code. Microsurgical cases and CPT codes with a case count of fewer than 10 were excluded. Total RVUs per case were calculated based on the sum of work RVUs for the principal procedure, and any other procedure that was performed during the case. Efficiency was defined as total RVUs divided by total operative time (i.e. RVUs/hour), based on previously published methodology. Mean efficiency per CPT code was ranked and compared by quartile using Student's t-tests.
Result(s): The sample consisted of 69 CPT codes with a total of 50,450 cases. The most common procedure was cleft palate repair of the soft and/or hard palate (CPT 42200). The mean efficiency for the top quartile of CPT codes was 15.65+/-4.22 (range 12.05-26.56) RVUs/hour, compared to 7.39+/-0.98 (range 5.57-8.69) RVUs/hour for the bottom quartile (p<0.001). The mean operative time for the top quartile of CPT codes was 167.14+/-90.29 minutes, compared to 107.79 +/-55.17 minutes for the lowest quartile (p=0.029). In the top quartile, the majority of CPT codes were craniofacial procedures including frontofacial procedures (23.53%) and craniectomies for craniosynostosis or bony lesions (35.29%). The lowest quartile was comprised mainly of CPT codes for cleft procedures including surgeries for velopharyngeal insufficiency (17.65%), cleft palate repair (23.53%), and cleft septoplasty (5.88%). It was 2.5 times more efficient for a cleft and craniofacial surgeon to perform a local skin flap (15.18 RVUs/ hour, CPT 14040) than a secondary palatal lengthening for cleft palate (6.09 RVUs/hour, CPT 42200).
Conclusion(s): The current RVU allocation to cleft and craniofacial procedures creates arbitrary disparities in physician efficiency, with cleft procedures disproportionately negatively affected despite being among the most common procedures. RVU assignments should be reevaluated to avoid disincentivizing cleft surgical care

Regional blocks are being increasingly utilized for anesthesia for various orthopedic procedures. Several studies have shown that regional anesthesia has fewer side effects and improved postoperative pain relief compared to general anesthesia, but regional blocks are not without risks. We present case reports of 2 patients who experienced posterior shoulder instability, one of whom had a posterior shoulder dislocation, immediately in the postanesthesia care unit after undergoing hand surgery with regional anesthesia. This paper highlights the importance of being aware that patients might be at increased risk of shoulder instability after upper extremity regional anesthesia, and appropriate perioperative precautions should be taken.

PURPOSE/OBJECTIVE:This study evaluated the effect of different tightening protocols on the probability of survival of screw-retained implant-supported anterior crowns. MATERIALS AND METHODS/METHODS:Seventy-two implants with internal conical connections (4.0 × 10mm, Ti-6Al-4V, Colosso, Emfils) were divided into four groups (n = 18 each): 1) Manufacturer's recommendations torque (25 N.cm for abutment's screw and 30 N.cm for crown's screw) (MaT); 2) Retightening after 10 min (ReT); 3) Torque 16% below recommended to simulate an uncalibrated wrench (AgT), and; 4) Temporary crown simulation (TeT), where crowns were torqued to 13 N.cm to simulate manual tightening, subjected to 11,200 cycles to simulate temporary crown treatment time (190 N), and then retightened to manufacturer torque (TeT). All specimens were subjected to cyclic fatigue in distilled water with a load of 190 N until 250,000 cycles or failure. The probability of survival (reliability) to complete a mission of 50,000 cycles was calculated and plotted using the Weibull 2-Parameter analysis. Weibull modulus and number of cycles at which 62.3% of the specimens would fail were also calculated and plotted. The failure mode was characterized in stereo and scanning electron microscopes (SEM). RESULTS:The probability of survival was 69.3% for MaT, 70% for ReT, 54.8% for AgT, and 40.3% for TeT, all with no statistically significant difference. Weibull modulus was approximately 1.0 for all groups. The characteristic number of cycles for failure was 105,000 cycles for MaT, 123,000 for ReT, 82,000 cycles for AgT, and 54,900 cycles for TeT, with no significant difference between groups. The chief failure mode for MaT, ReT, AgT groups was crown screw fracture, whereas abutment screw fracture was the chief failure mode for the TeT group. CONCLUSION/CONCLUSIONS:Tightening protocol did not influence the probability of survival of the screw-retained anterior crowns supported by internal conical implants (Ti-6Al-4V, Colosso, Emfils).

BACKGROUND:β-Tricalcium phosphate (β-TCP) is one of the most common synthetic bone grafting materials utilized in craniofacial reconstruction; however, it is limited by a slow degradation rate. The aim of this study was to leverage 3-dimensional (3D) printing in an effort to accelerate the degradation kinetics of β-TCP. METHODS:Twenty-two 1-month-old New Zealand white rabbits underwent creation of calvarial and alveolar defects, repaired with 3D-printed β-TCP scaffolds coated with 1000 μM of osteogenic agent dipyridamole. Rabbits were euthanized after 2, 6, and 18 months after surgical intervention. Bone regeneration, scaffold degradation, and bone mechanical properties were quantified. RESULTS:Histological analysis confirmed the generation of vascularized and organized bone. Microcomputed tomography analysis from 2 to 18 months demonstrated decreased scaffold volume within calvarial (23.6% ± 2.5%, 5.1% ± 2.2%; P < 0.001) and alveolar (21.5% ± 2.2%, 0.2% ± 1.9%; P < 0.001) defects, with degradation rates of 54.6%/year and 90.5%/year, respectively. Scaffold-inducted bone generation within the defect was volumetrically similar to native bone in the calvarium (55.7% ± 6.9% vs 46.7% ± 6.8%; P = 0.064) and alveolus (31.4% ± 7.1% vs 33.8% ± 3.7%; P = 0.337). Mechanical properties between regenerated and native bone were similar. CONCLUSIONS:Our study demonstrates an improved degradation profile and replacement of absorbed β-TCP with vascularized, organized bone through 3D printing and addition of an osteogenic agent. This novel additive manufacturing and tissue engineering protocol has implications to the future of craniofacial skeletal reconstruction as a safe and efficacious bone tissue engineering method.

BACKGROUND:Incision planning is a critical factor in nipple-sparing mastectomy outcomes. Evidence on optimal incision patterns in patients undergoing nipple-sparing mastectomy and immediate microvascular breast reconstruction is lacking in the literature. METHODS:A single-institution retrospective review was performed of consecutive patients undergoing nipple-sparing mastectomy and immediate microvascular autologous reconstruction from 2007 to 2019. Outcomes-including major mastectomy flap necrosis, full nipple-areola complex necrosis, and any major ischemic complication of the skin envelope-were compared among incision types. Multivariable logistic regression identified factors associated with major ischemic complication. RESULTS:Two hundred seventy-nine reconstructions (163 patients) were identified, primarily using internal mammary recipient vessels (98.9 percent). Vertical incisions were used in 139 cases; inframammary, in 53; lateral radial, in 51; and inverted-T, in 35. Thirty-two cases (11.5 percent) had major mastectomy flap necrosis, 11 (3.9 percent) had full nipple-areola complex necrosis, and 38 (13.6 percent) had any major ischemic complication. Inframammary incisions had higher rates of major ischemic complication (25 percent) than vertical (5.8 percent; p < 0.001) and lateral radial (7.8 percent; p = 0.032) incisions. Inverted-T incisions also had higher rates of major ischemic complication (36.1 percent) than both vertical (p < 0.001) and lateral radial (p = 0.002) incisions. Inframammary incisions (OR, 4.382; p = 0.002), inverted-T incisions (OR, 3.952; p = 0.011), and mastectomy weight (OR, 1.003; p < 0.001) were independently associated with an increased risk of major ischemic complication. Inframammary incisions with major ischemic complication demonstrated significantly higher body mass index, mastectomy weight, and flap weight compared to those without. CONCLUSIONS:Inframammary and inverted-T incisions are associated with a higher risk of major ischemic skin envelope complications after nipple-sparing mastectomy and immediate microvascular breast reconstruction. Radial incisions can be considered to optimize recipient vessel exposure without compromising perfusion. CLINICAL QUESTION/LEVEL OF EVIDENCE/METHODS:Therapeutic, III.

Current breast cancer care involves a multidisciplinary clinical approach for diagnosis and treatment including input from radiology, surgery, pathology, radiation, and medical oncology. Radiation is an integral part of the treatment for locoregionally confined breast cancer, and has well-recognized long-term risks of secondary malignancies, such as angiosarcomas. Basal cell carcinoma (BCC), a common skin malignancy, is not typically considered a radiation-induced carcinoma following breast cancer treatment. Our recent experience with 4 patients with vastly different presentations of BCC in previous radiation fields prompts the current report in order to alert clinicians to this entity.