Faculty Bibliography

Background/purpose: Effects of implant angulation on digital impression accuracy remain controversial. The purpose of this study was to assess the relationship between the alteration of implant scan bodies and the trueness of digital impressions. Materials and methods: A maxillary typodont without the right premolars and first molar was scanned with a laboratory scanner and saved as a standard triangular language (STL) file. A model from the STL file was fabricated with a 3-dimensional printer. Two implants were placed into the first premolar and first molar sites of the model, followed by the insertion of two scan bodies onto the implants. These scan bodies were divided into four test groups, based on the surface modifications. A digital impression of each typodont was made with three different intraoral scanners. An abutment was digitally seated on each implant. 120 STL files (30 for each group) of the typodont with two implants and two corresponding abutments were used for statistical analysis. Results: A total of 240 values (two implants for each typodont) were obtained after each sample (4 groups) was scanned 10 times by utilizing three intraoral scanners. The overall linear and angular discrepancies were analyzed. Group 1 showed the lowest linear discrepancy of 14.9 ± 5.4 μm while Group 4 reported the highest linear discrepancy of 137.5 ± 41.7 μm, yielding a statistical significance (P < 0.05). Conclusion: It has been concluded that the more adjustments made to the scan bodies, the greater the linear and angular deviations occur, compromising the trueness of the digital implant impression.

Background/purpose: Dental implants have been a popular treatment for replacing missing teeth. The purpose of this study was to investigate the impact of engaging (hexagonal) and non-engaging (non-hexagonal) abutments in various six-unit fixed prosthesis on the stress distribution and loading located in the implant neck, implant abutment, and surrounding bone. Materials and methods: Three implants were digitally designed and inserted parallel to each other in edentulous sites of the maxillary right canine, maxillary right central incisor, and maxillary left canine. Titanium base engaging abutments, non-engaging abutments and connecting screws were designed. Five distinct models of 6-unit fixed dental prosthesis were created, each featuring different combinations of various abutments. Forces (45-degree angle) were applied to the prosthesis, allowing for the analysis of the stress distribution on the implant neck and abutments, and the maximum and minimum principal stress values on the cortical and trabecular bone. Results: Von Mises stress values and stress distributions located in the implant neck region due to the applied loading forces were analyzed. The overall stress values were highest while employing the hexagonal abutments. The maxillary left canine with a hexagonal abutment (model 5) reported the highest von mises value (64.71 MPa) while the maxillary right canine with a non-hexagonal abutment (model 4) presented lowest von mises value (56.69 MPa). Conclusion: The results suggest that both the various abutment combinations (engaging and non-engaging) on five different models have a similar influence on the distribution of stress within the implant system.

BACKGROUND/PURPOSE/UNASSIGNED:Zirconia has recently become a popular material for fixed restorations. The purpose of this study was to use a digital workflow to fabricate monolithic zirconia fixed dental prostheses (FDPs) and assess the connection between variable connector sizes compared to their clinical performance. MATERIALS AND METHODS/UNASSIGNED:for the 4-unit restorations (pontic to pontic). Biological an technical outcomes of the FDPs were performed at 1 week, 6 months and then annually for 6 consecutive years. RESULTS/UNASSIGNED:in the two broken 4-unit FDPs. CONCLUSION/UNASSIGNED:The results of this study suggest that the use of digital scanning and milling to fabricate monolithic zirconia FDPs of posterior regions may be an acceptable alternative restorative approach to traditional metal-ceramic restorations.

PURPOSE/UNASSIGNED:The purpose of this systematic review was to compare the clinical performance of lithium disilicate (LDS) and zirconia (Z) single crowns manufactured by computer-aided design/computer-aided manufacturing (CAD/CAM) systems using intraoral optical scanners (IOS). MATERIALS AND METHODS/UNASSIGNED:An electronic search for articles published between January 2012 and January 2022 in the English language was performed with the Medline/Pubmed database under the guidelines of Preferred Reporting Items for Systemic Reviews and Meta-analysis (PRISMA). The specific search terms used were "zirconia", "lithium disilicate", "CAD/CAM", "intraoral optical scanner", and "survival". RESULTS/UNASSIGNED:The initial electronic search resulted in 278 articles. Most of the resulting articles were excluded, six clinical studies addressing the clinical outcomes of Z and LDS crowns fitted the inclusion criteria and were selected for review. Of these six studies, three were randomised controlled trials, two were retrospective studies, and one was a prospective study. To quantify the clinical performance of the crowns several parameters were recorded, including fractures, endodontic complications, periodontal complications, technical complications, aesthetic complications, and biological complications. It was noted that the most common technical complication of Z and LDS crowns was chipping at a rate of 1.4% and 5% respectively. Regarding Z crowns, aesthetic concerns were the most frequently observed complication. CONCLUSION/UNASSIGNED:The outcomes of this systematic review indicate that Z and LDS crowns display a similar incidence of periodontal and endodontic complications when compared to metal-ceramic crowns, suggesting that these all-ceramic materials are viable alternatives. The incidence of chipping was higher in LDS crowns compared to other materials, while Z crowns were inferior in terms of aesthetics.

This report describes a digital workflow and two-year follow-up of an immediately loaded implant-retained overdenture using flapless surgery and a computer-aided design/computer-aided manufacturing (CAD/CAM) surgical guide. A prosthetically-driven approach, utilising a three-dimensional (3D) planning software and a CAD/CAM surgical guide, was used to place four implants in the edentulous maxillary arch of a 59-year-old male patient. All four implants were inserted through the surgical guide without raising soft tissue flaps. After placement, the patient was delivered an immediately loaded maxillary overdenture. Surgical implant placement was well tolerated by the patient, who reported no discomfort. Following a four-month period, a new implant-retained maxillary overdenture reinforced by a metal framework was fabricated and delivered to the patient. There were no adverse issues noted with neither the implants nor the maxillary overdenture during the two-year follow up period. The technique using the workflow described in this report may be a predictable and affordable alternative in the restoration of edentulous arches as compared to full-arch fixed restorations.

By utilising open-source digital software, clinicians can create an integrative digital workflow composed of various technological systems. This report presents a clinical case that follows a comprehensive digital workflow to improve the smile of a 42-year-old female patient. The patient presented with minor attrition of maxillary anterior teeth and discoloured, asymmetrical composite restorations on central maxillary incisors. Her smile was rehabilitated by restoring her maxillary anterior teeth with lithium disilicate ceramic veneers. A smile design system was used to create a virtual simulation of the patient's desired treatment outcome. Utilising a 3D tooth library generated by the smile design system, extra-oral photographs, and intra-oral scans of the patient's maxillary and mandibular arches, a 3D model of the proposed smile design was created in an advanced 3D sculpting software. The resin casts that were fabricated with a 3D printer were used to fabricate a mockup and sent to the laboratory as reference for the final restoration. The specific shade recipe for the ceramic veneers was obtained using a special polar eye filter and digital shade matching software. There is no doubt that advancements in digital technology are providing clinicians with limitless treatment modalities. From intra-oral scanners and smile design systems to 3D sculpting software and even digital shade matching systems, continuous technological developments are paving the way for the complete digitalisation of dentistry. This case report presents an example of this digital revolution.