Faculty Bibliography

BACKGROUND: It is still thought by some that a common wall is to be found in the normal heart between the attachments of the caval and pulmonary veins, with absence of this wall underscoring the presence of sinus venosus defects. Recent findings using episcopic microscopy in developing mice have shown the deficiencies of this notion. Understanding that the superior rim of the oval fossa is a fold, rather than a true septum, which can be distorted in the presence of partially anomalous pulmonary venous drainage, has provided an alternative explanation for the morphogenesis of sinus venosus defects. METHODS: We reviewed our experience with patients suspected of having a sinus venosus defect from August, 2011, through October, 2015, analysing the findings in light of the current hypotheses used to explain the development of the defects, along with correlations made by inspection of autopsy specimens. RESULTS: We evaluated findings from 16 patients, with a mean age of 7.7 years, ranging from 2.7 to 15 years. Of the group, 13 were ultimately diagnosed with a superior sinus venosus defect, two with an inferior defect, and one with isolated anomalous pulmonary venous connection in the absence of an interatrial communication. Initially, two patients were thought to have oval fossa defects, one from each subtype, but were correctly diagnosed following cardiac magnetic resonance interrogation. Anomalous pulmonary venous connections were present in all cases. CONCLUSION: Appreciation of the changes occurring during normal cardiac development helps in understanding the anatomical substrate underscoring the spectrum of sinus venosus defects. The lesions are veno-venous connections due to partially anomalous pulmonary venous connections, producing interatrial communications outside the confines of the interatrial septum.

Rapid prototyping is quickly gaining utility in various complex forms of CHD. In properly selected cases, these printed models provide detailed anatomical understanding that help guide potential surgical and cardiac catheterisation interventions. We present a case of a tunnel-like ventricular septal defect referred for surgical repair, where the decision to obtain a three-dimensional printed model helped in better understanding of the anatomy, leading to delaying, and hopefully avoiding altogether, surgical repair.

BACKGROUND:Repair of complete atrioventricular canal (CAVC) with tetralogy of Fallot (TOF) is a challenging operation increasingly being performed as a complete, primary repair in infancy. Previous studies have focused on perioperative outcomes; however, midterm valve function, ventricular function, and residual obstruction have received little attention. METHODS:We retrospectively reviewed 20 patients who underwent CAVC/TOF repair (January 2005 to December 2014). A two-patch repair was used in all patients to correct the CAVC defect. Tetralogy of Fallot repair included transannular patch in 11 (65%) patients and valve-sparing in 6 (35%) patients. RESULTS:The average age at surgery was 72 ± 122 weeks, 40% were male, and 80% had trisomy 21. Mean echo follow-up was 3.0 ± 3.0 years. There were no in-hospital or late mortalities. The rate of reoperation was 20%. At the latest follow-up, moderate left atrioventricular valve regurgitation was present in three (15%) patients and mild stenosis present in seven (35%) patients. One (5%) patient had moderate right ventricular outflow tract (RVOT) obstruction. The valve-sparing population was smaller at the time of surgery than the non-valve-sparing cohort (body surface area: 0.28 ± 0.04 vs 0.42 ± 0.11, P = .002) and less likely to have had a previous shunt (0% vs 64%, P = .01). Among the valve-sparing patients (six), at the latest follow-up, moderate pulmonary insufficiency was present in two (33%) patients. CONCLUSION/CONCLUSIONS:Repair of CAVC concomitant with TOF can be performed with low mortality and acceptable perioperative morbidity. Management of the RVOT remains a challenge for the long term.

Rapid prototyping facilitates comprehension of complex cardiac anatomy. However, determining when this additional information proves instrumental in patient management remains a challenge. We describe our experience with patient-specific anatomic models created using rapid prototyping from various imaging modalities, suggesting their utility in surgical and interventional planning in congenital heart disease (CHD). Virtual and physical 3-dimensional (3D) models were generated from CT or MRI data, using commercially available software for patients with complex muscular ventricular septal defects (CMVSD) and double-outlet right ventricle (DORV). Six patients with complex anatomy and uncertainty of the optimal management strategy were included in this study. The models were subsequently used to guide management decisions, and the outcomes reviewed. 3D models clearly demonstrated the complex intra-cardiac anatomy in all six patients and were utilized to guide management decisions. In the three patients with CMVSD, one underwent successful endovascular device closure following a prior failed attempt at transcatheter closure, and the other two underwent successful primary surgical closure with the aid of 3D models. In all three cases of DORV, the models provided better anatomic delineation and additional information that altered or confirmed the surgical plan. Patient-specific 3D heart models show promise in accurately defining intra-cardiac anatomy in CHD, specifically CMVSD and DORV. We believe these models improve understanding of the complex anatomical spatial relationships in these defects and provide additional insight for pre/intra-interventional management and surgical planning.

We report a case of retrograde transcatheter device closure of a complex paravalvular leak (PVL) after bioprosthetic pulmonary valve replacement (PVR) in a 13-year-old patient with congenital pulmonary valve stenosis. There are prior reports of pulmonary PVL closure after PVR in adults (Seery and Slack, Congenit Heart Dis 2014;9:E19-F22), but indications for and technical considerations in PVL closure after bioprosthetic PVR, particularly in children, are not well defined. (c) 2015 Wiley Periodicals, Inc.

BACKGROUND: Bacterial infection (BI) after congenital heart surgery (CHS) is associated with increased morbidity and is difficult to differentiate from systemic inflammatory response syndrome caused by cardiopulmonary bypass (CPB). Procalcitonin (PCT) has emerged as a reliable biomarker of BI in various populations. AIM: To determine the optimal PCT threshold to identify BI among children suspected of having infection following CPB. SETTING AND DESIGN: Single-center retrospective observational study. MATERIALS AND METHODS: Medical records of all the patients admitted between January 2013 and April 2015 were reviewed. Patients in the age range of 0-21 years of age who underwent CHS requiring CPB in whom PCT was drawn between postoperative days 0-8 due to suspicion of infection were included. STATISTICAL ANALYSIS: The Wilcoxon rank-sum test was used for nonparametric variables. The diagnostic performance of PCT was evaluated using a receiver operating characteristic (ROC) curve. RESULTS: Ninety-eight patients were included. The median age was 2 months (25th and 75th interquartile of 0.1-7.5 months). Eleven patients were included in the BI group. The median PCT for the BI group (3.42 ng/mL, 25th and 75th interquartile of 2.34-5.67) was significantly higher than the median PCT for the noninfected group (0.8 ng/mL, 25th and 75th interquartile 0.38-3.39), P = 0.028. The PCT level that yielded the best compromise between the sensitivity (81.8%) and specificity (66.7%) was 2 ng/mL with an area under the ROC curve of 0.742. CONCLUSION: A PCT less than 2 ng/mL makes BI unlikely in children suspected of infection after CHS.

Background: Complex ventricular-arterial (VA) relationships in patients with double outlet right ventricle (DORV) make preoperative assessment of potential repair pathways challenging. The relationship of the ventricular septal defect (VSD) to one or both great arteries must be understood and this influences the choice of surgical procedure [1] In neonates and infants with DORV, Computed Tomography (CT) is often performed due to the ability to get high spatial resolution and ECG gated images [2], however it is possible to get the necessary information from Magnetic Resonance (MR) imaging with an added advantage of avoiding exposure to ionizing radiation. Both CT and MR allow image acquisition in three dimensions (3D) but traditional viewing of the anatomy using the multiplanar reformatting is actually done in two dimensions (2D). Volume rendering from either modality may also be performed, but typically only the external vascular anatomy is depicted. We hypothesized that it is possible to accurately define the intracardiac anatomy in infants with DORV using virtual and physical 3D printed (rapid prototyped) models created from either MR or CT and this can both aid in better defining potential VA pathways and may assist in surgical decision making. Methods: Virtual and physical 3D models were generated for three patients with DORV. Non-ECG-gated 3D spoiled fast gradient echo sequence MR angiography was used for two patients. Retrospective ECG gated CT angiography images acquired in diastole were used in the third patient (to better define the coronary arteries given the suspicion of a single coronary artery by echocardiography). Blood pool segmentation (Figure 1a) was performed in all the three patients (Mimics, Materialise, Leuven, Belgium). A 2 mm shell was added to the blood pool and it was hollowed to create a patient specific heart replica (3-matic, Materialise, Leuven, Belgium). All virtual models were cut to best demonstrate the VA relationships and the models were printed. Results: The VSD and VA relationships were well visualized in all three patients using both the virtual and physical models (Figure 1b,c). The models helped the surgeons better understand the anatomy in all patients: in two patients the surgical plan was altered while the plan was confirmed in the third patient (Table 1). Conclusions: Construction of 3D models in patients with DORV is feasible and allows for extensive examination and surgical planning. This may facilitate a focused and informed surgical procedure and improve the potential for successful outcome. For purposes of DORV, non-gated MRA is sufficient to delineate the VA relationships adequately for 3D printing and enhanced clinical decision-making. CT imaging should be reserved for only those patients where additional information like coronary artery anatomy is desired